Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM

20

Using the Security System (Security Menu)

You can control your security system using the VAM’s Security menu, which
includes arming, disarming, and bypassing zones. Refer to the control panel’s
“User Guide” for details on specific security system functions.

User Codes

Each user was assigned a name and 4-digit user code by your installer at the
time of installation. To add additional user codes, refer to your security

systems “User Guide.”

Introduction to Arming and Disarming the System

You can arm your system in one of three arming modes: Away, Stay, and

Night. The following table lists the three different arming modes and the

results of each.

MODE
NOTES
AWAY
Use when no one is staying on the premises. When armed
in AWAY mode, the system sounds an alarm if a protected
door or window is opened, or if any movement is detected
inside the premises.

IMPORTANT: On certain VISTA-Turbo systems, “Away

Auto Stay” mode is shown as “Away” mode (with all zones
monitored). However, some interior zones may not be
armed. Contact your installation company for more
information.
STAY
Use when you are staying home, but might expect someone
to use the entrance door later.
When armed in STAY mode, the system sounds an alarm
if a protected door or window is opened, but you may
otherwise move freely throughout the premises.
NIGHT
Use when you are staying home and do not expect anyone
to use the entrance door. Your installer may have
configured NIGHT Mode differently; have the installer
describe the actual settings of this mode.
Arm Multi Partition
Use to arm more than one partition, if you are authorized
to do so. Refer to the “Arming Multiple Partitions section
for details.
Console Mode
This mode emulates a standard alpha keypad. If desired,
you can use this mode to control the security system using
standard keypad commands. Refer to the “Console
Emulation Mode section for details.
Show Zones
Use to display the zones programmed in your system.
From this menu you can view faulted zones (zones not
ready to arm) and bypass zones. Refer to the How to
Bypass Zones” section for details.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results