Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM

16

Security

Choose the security mode, which causes the action to
begin:
Disarm (action starts when the system is disarmed)
Away (action starts when system is armed Away
mode)
Stay (action starts when system is armed Stay
mode)
Night (action starts when system is armed Instant
or Night mode)
Away Secured (action starts after exit delay
expires)
Alarm (action starts on any alarm condition)

Thermostat

Choose the temperature, which causes the action to
begin:
Above (set the temperature)
Below (set the temperature)

Door

Choose the door status, which causes the action to begin:
Locked (action starts when the door is locked)
Unlocked (action starts when the door is unlocked)
Code Unlocked (action starts when door is
unlocked by manual code entry)

Zones

Choose the zone condition, which causes the action to
begin:
Restore (for trigger only; not for use with
conditions)
Alarm (upon an alarm from a specific zone or zones)
Fault (upon a fault from a specific zone or zones)

Garage

Door

Choose the garage doors condition, which causes the
action to begin:
Opened (action starts when door the status of the
door changes to open)
Closed (action starts when door status of the door
changes to close)

Water Valve

Choose the valves position, which causes the action to
begin:
Opened (action starts when valve opening is
finished.)
Closed (action starts when valve closing is finished)

Condition

Defines an optional event that adds a condition to the trigger.

If a condition is set, the condition must exist at the time of the

trigger, in order for the action to occur. Conditions include the

same categories as triggers, however, conditions cannot be set

with the same category as the trigger. (ex., if setting a trigger
event for security, you cannot use a security event as a

condition).

Action

Defines the desired device action(s) when the trigger event

occurs. Actions include the following categories:

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results