Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
13
This Z-WAVE controller is about to be factory defaulted and will lose all
devices in the enrolled list.
All Z-WAVE devices must be re-enrolled after this reset. Each device will
have to be excluded before it can be re-enrolled’
Yes or No
NOTE: This defaults the Z-Wave network on the VAM and creates a new
network ID; removes Z-Wave devices from the VAM only. This does not
exclude devices from the network. Each device will need to be individually
excluded before it can be re-included into the newly created network (or if
the device is to be used on a different locations network).
Using VAM as a Secondary Controller
The VAM can be used as a secondary controller when connected to another Z-
Wave network.
NOTE: If the VAM is configured as secondary controller, it cannot be used
with Total Connect Remote Services.
1. Remove any Z-Wave devices previously included in VAM.
Press Automation > Z-Wave Setup > Z-Wave Default > Yes.
2. Press Z-Wave Primary Controller (located on the bottom right of the Z-
Wave Management screen) to switch VAM to secondary controller. The Z-
Wave Primary icon (P) changes to Z-Wave Secondary icon (S) accordingly.
3. Start the inclusion process at the other network’s primary controller (see
controller’s manual), then press Add Device in VAM’s Z-Wave
Management screen to add (include) VAM to the controller. To remove
(exclude) VAM from the primary controller, start the exclusion process at
the other network’s primary controller, then press Remove Device on the
VAM.
NOTE: This action will automatically change the VAM back to a Primary
Controller.
Z-Wave Advanced Setup (for Installer use only)
IMPORTANT: The Z-Wave Advanced Setup menu is intended for the installer
only and the settings should not be changed by the user. Changing these
settings can cause system errors.
Z-Wave System Notes
1. Motorized door lock bolts physically lock and unlock when activated, but if
the door lock installed is a non-motorized type, activation allows the door to
be manually unlocked without a key.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results