Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
12
“Adding Slave Unit”
“Device added successfully
D. Z-Wave Water Valves
Have a professional plumber install the Z-Wave water valve the
device should be mounted in the final location and tested before
adding it to the system.
NOTE: Honeywell is not responsible for property damages due to
improper installation of the water valve.
i. Perform steps 1 & 2 above.
ii.. At the Z-Wave water valve press the function key to enroll
iii. At the VAM: The screen displays a series of messages:
“Please press function key on device”
“Adding Slave Unit”
“Device added successfully”
iv. To verify activation, press Back and wait 30 seconds. Press
Refresh and the new device is displayed.
Editing Z-Wave Device Names and Icons
You can change the name of a device by using Edit Name:
Press Automation > Z-Wave Setup > Choose Device > Edit Name > Enter
New Name > OK.
To display a different icon select the icon from the list below (NOTE: This
only applies to binary and multilevel switches):
Light Bulb
Light Switch
Garage Door
Sprinkler
Pool
Water Faucet
Strobe
Window
Siren/Sounder
Fan
Abort a Z-Wave Action
If you inadvertently make a wrong selection, (Add Device or Delete Device)
press Abort to stop the process.
Defaulting the Z-Wave Network
To default and remove all Z-Wave devices, press Automation > Z-Wave
Setup > Z-Wave Default > Yes. The following message is displayed:

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results