Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
11
Please press function key on device”
“Adding Slave Unit”
“Adding to Security Network”
Do not use any garage door automation with any garage door opener that
lacks the safety features required by U.S. federal safety standards (this
includes any garage door opener model manufactured before January 1,
1993). A garage door opener that cannot detect an object and stop and
reverse the door does not meet current U.S. federal safety standards. Your
garage door opener also must signal before unattended door operation. For
more information please consult your garage door opener manual.
Access control functionality has not been evaluated and
may not be used in
agency compliant applications.
C. Honeywell Thermostat
Have a professional HVAC contractor install the Honeywell
Thermostat according to the manufacturer’s instructions. The device
should be mounted in the final location and tested before adding it to
the system.
NOTES:
Honeywell is not responsible for property damages due to
improper setting of the thermostat modes, or improper wiring if
not installed by a qualified technician.
If installing another brand of thermostat, follow the instructions in
the User Guide for that specific thermostat to include properly into
the Z-Wave network.
If not using a Honeywell thermostat, enrollment procedure may
vary. Refer to the thermostat instructions for enrollment
procedure.
i. Perform steps 1 & 2 above.
ii.. At the Z-Wave thermostat:
a) Select Thermostat; set Time/Date.
b) Follow the instructions in the thermostat Installation Guide for
“Z-Wave enrollment”.
c) To complete inclusion, press Done.
d) Press Exit to return to normal operation.
iii. At the VAM:
a) To verify activation, press Back and wait 30 seconds. Press
Refresh and the new device is displayed.
The screen displays a series of messages:
Please press function key on device”
“Adding Controller Unit”

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results