Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM

– 9 –

Z-Wave Device List Icons

RoomSetup
SceneSetup
Z-WaveSetup
GroupSetup
Refresh

Z-Wave Device Management Icons

Add Device
This icon is for including or adding a new device to the network
Remove
Device
This icon is for removing, or excluding, a device from the devices
current network (NOTE: the device does not have to be on the same
network.)
Abort
operation
Aborting a Z-Wave Add Device or Remove Device operation is used to
cancel that operation.
Remove
Failed
If a device, or node, is no longer operational or will not remove by
using the Remove Device operation, Removed Failed device removes
the device from the list.
Edit
Name/Icon
Editing the device is for changing the defaulted name to a custom
descriptor chosen by the installer or end user (NOTE: this is also the
location for changing the icons picture of switches.)
Search
Device
If a device is no longer functional, this option allows you to press the
desired device, press Search Device and the VAM scans the network
for the device. If successful the device route will be updated. If failed,
then the device was not found by the VAM.
Scan
Network
Then Scan Network operation rebuilds the entire Z-Wave network by
taking note of each device and determining the best route for each.
This helps improve Z-Wave network performance. Also known as Z-
Wave network rediscovery
Z-Wave
Reset
The ability to reset the Z-Wave controller without resetting the VAM,
it power cycles the internal Z-Wave card.
Z-Wave
Default
Press the icon to request a network ID, or remove all the existing
devices. (NOTE: This does NOT remove each device. Once defaulted,
you must use the “Remove Deviceoperation on each device. If this
operation is not completed the device cannot be included into the new
network.
Primary
Controller
This icon will display the current role of the controller. If the device
displays a “P” it is the Primary Controller and can add and remove
devices. If the device displays an “S” it is the Secondary Controller
and only displays and control devices. Example, if used in conjunction
with a Tuxedo Touch™ keypad and experiencing network performance
issues, the VAM can be used to extend the network by programming it
in as a secondary controller to the Tuxedo Touch’s network.
Secondary
Controller

Manually Operating Devices

Devices can be programmed to operate automatically based on scenes you

define (refer to the Creating Scenes section). Or, you can manually control

devices from the Device List screen

(press Automation).

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results