Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
– 7 –
2. The Test Camera feature requires installation of QuickTime
®
on the
smart device. Devices for Android do not currently support QuickTime.
IMPORTANT: Use cameras for non-security purposes only. Camera
streams viewed from the web browser can stop without indication due to
network connection issues.
Adding Cameras to the System
NOTE: VAM must be Wi-Fi connected to the home router before adding
cameras.
1. Before mounting your camera, connect a Cat5/6 cable to the back of the
camera and connect the opposite end to the Ethernet port on your router.
Initial camera setup cannot be performed over a wireless connection.
2. Apply power to the Camera. It may take a few seconds for initial power-up
of camera.
3. Press Multimedia > Camera Setup to display the “Camera List” screen.
4. Press Discovery to locate the camera. Once located, highlight the camera
address and go to Step 6 below.
5. If the camera information is not automatically obtained, press the Add to
manually enter the appropriate information, if known. Refer to the
cameras installation instructions for this information.
To edit camera information, highlight the listed camera name and press
Edit; enter the desired name for the camera.
If known, enter the appropriate
information (as seen below). Refer to the cameras installation instructions
for this information.
Name
IP Address
RTSP Path
Resolution
MJPEG Path
Mobile Path
HTTP Port #
RTSP Port #
Model
Frame Rate
NOTE: The camera’s frame rate options are 1-30 frames per second,
with a recommended rate of 1-8.
6. At this point is you chosen to leave the camera using the Cat5/6 press
SAVE and a pop up will display, “Adding/Updating Camera Details is in
Progress…” (See “Setting the Camera’s Wi-Fi Settings” section for manual
camera Wi-Fi setup.)
Setting the Camera’s Wi-Fi settings
The “Camera Wi-Fi” option sets the Wi-Fi options in the selected camera or
all camera’s if Wi-Fi options have changed.
NOTE: This option is only available for camera’s that have a hardwired
connection to the router, or switch, and are discoverable. The options are:
SSID
Security Mode
N/W Type
Chanel

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results