Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
– 5 –
Home Screen
The home screen allows you to gain access to changing, editing, the Wi-Fi
settings, access the security functions, access the multimedia (camera)
options, change the theme to accommodate mobile devices, access the setup
options and exit the VAM interface.

Configuring the Wi-Fi Settings

The Change Wi-Fi Router option is an alternative method of changing your
router, but is recommended only for users with network administration
experience. To accomplish this, the following will be needed:
Wi-Fi enabled smart device
(Tablet PC, laptop, Smartphone, etc.)
Home router SSID and WPA2 password (typically located on the home
router’s label or assigned by the network administrator); home router must
use WPA2 encryption and have a password (key) assigned.
NOTE: Before setting up the network, set your smart device for Wi-Fi
operation only (turn off the smart devices “mobile data” option).
Change the home Wi-Fi Router
1. Connect the smart device to the VAM using the normal process
instructed by the installer.
2. Press Setup > Network > Change WiFi Router and Enter the new SSID
and Password > Connect.
3. Accept the notification “Are you sure you want to replace your router
settings?” This is a 1-minute process, after which VAM will return to
the home screen once a successful connection has occurred. Bookmark
this page (or access it through vam.mylanconnect.com).
NOTE: It may be necessary to default the Wi-Fi settings:
1. Press and hold default/reset button for more than 5 seconds (The
VAM’s LEDs blink in various patterns indicating that reboot is in
progress. Reboot is complete when the blue and green LEDs light
steady.)
2. Connect Smart Device to the VAM using the device’s Wi-Fi
settings menu (At this point the VAM is a wireless access point.)
3. Enter the VAM’s SSID: VAM_xxxx (NOTE: xxxx = the last 4 digits
of the MAC address [case-sensitive])
4. Enter the Key (found on the VAM label “WPA2 pw” line)
5. Repeat the connection process above.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results