Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
– 4 –
LED Functions
The VISTA Automation Module has three LEDs as follows:
LED/BUTTON
MEANING
Power
Status
(green)
Indicates power status.
Blinking when it is powered up and booting.
Solid green when it is fully functional.
Network
Status
(blue)
When the WI-FI is connected to the VAM, it will show the
WI-FI status through the blue LED.
In normal operation, the LED blinks when VAM is
booting.
Solid blue when VAM is ready as AP mode (acting as an
Access Point).
Operation
Status
(yellow)
In normal operation, the LED is normally off.
It will blink slowly when there is no ECP(including ECP
error) or Z-wave controller not responding.
Fast blinking indicates Z-wave is in enrollment or
deletion status.
Reset Button
Press to reboot the device.
Wi-Fi
and
Factory
Default
Button
The Wi-Fi and Factory reset options utilize the Reset
Button to perform the required operation:
Wi-Fi Network Reset: Press and hold down for more
than 5 seconds to clear the VAM’s Wi-Fi network
connection. You then need to reconnect the VAM to your
Wi-Fi network.
Factory Default Reset: Double press this button, then,
while the green, blue, and yellow LEDs blink in
sequence, press and hold down this button for more
than 5 seconds to set to factory defaults.
NOTE: See Appendix A for trouble shooting.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results