Honeywell TrueZONE HZ322 manual

Honeywell TrueZONE HZ322
7.5 · 1
PDF manual
 · 12 pages
English
manualHoneywell TrueZONE HZ322
HZ322 TrueZONE
®
Zone Panel Professional Installation Guide
69-2199-03

View the manual for the Honeywell TrueZONE HZ322 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Honeywell TrueZONE HZ322 or do you need help? Ask your question here

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
J
Jerry WaddellJune 18, 2023

There is no heat or air conditioner called for but the fan in the air handler continues to run. What action should be taken?

R
Ryan RichardJanuary 27, 2024

Honeywell hz322 Heat 1 solid red Zone 1,2,3 all green DAT is reading 63F 3 Thermostats set to Heat, auto fan, 68. Actual temp ranges from 60-63 in different rooms. How can I get warmer air to come out of my furnace?

M
Mike SerafineDecember 1, 2023

I have no power to the HZ322 unit. There is power to the furnace and the attached thermostat click when activated with new batteries in place. The low voltage trans former is slightly warm but not hot or discolored.

M
Minute May 26, 2024

How to replace filter in hz322

D
David KlossJuly 25, 2023

why is zone 1 red and zone 2 green

N
NealSeptember 13, 2023

Will hz322 work with Duro dyne L29842 damper

The Honeywell TrueZONE HZ322 is an HVAC control panel that enables zoning and temperature control for up to three zones in a house or building. It allows for easy installation and setup with intuitive wiring diagrams and color-coded terminals. The HZ322 also features a robust display that shows the status of all connected heating and cooling equipment, as well as clear error codes for quick troubleshooting. With advanced features like advanced bypass and diagnostics, the HZ322 can optimize airflow and reduce energy consumption. It has a fan discharge output that can support up to four dampers, and it can be used with a wide range of thermostats. The HZ322 also has a security feature that allows the installer to lock the system to prevent unwanted tampering, adding an extra level of safety and control. Overall, the Honeywell TrueZONE HZ322 is a reliable and efficient HVAC control panel that provides comprehensive zoning and temperature control. It is an ideal solution for residential and light commercial applications where individual comfort control is desired.

General
BrandHoneywell
ModelTrueZONE HZ322
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell TrueZONE HZ322 below.

How do I program the temperature settings on my Honeywell TrueZONE HZ322?

To program the temperature settings, navigate to the "Program Schedule" menu on the thermostat control panel. From there, select the desired time slots and adjust the temperature accordingly.

My Honeywell TrueZONE HZ322 is displaying an error code. What should I do?

If your system shows an error code, first try resetting the thermostat by turning it off and on again. If the issue persists, check if there are any specific troubleshooting steps related to the error code in the manual, as it could help diagnose the problem.

How can I manually override the programmed schedule on my Honeywell TrueZONE HZ322?

To manually override the programmed schedule, locate the "Temporary Schedule Override" option on the thermostat and select it. From there, you can manually adjust the temperature settings for a temporary period until the next programmed time slot.

The airflow from my Honeywell TrueZONE HZ322 seems insufficient. How can I adjust it?

To adjust the airflow, locate the "Zone Dampers" menu on the thermostat control panel. From there, you can adjust the individual dampers to allow more or less airflow to specific zones, ensuring proper distribution based on your preferences.

How do I change the fan operation mode on my Honeywell TrueZONE HZ322?

To change the fan operation mode, navigate to the "Fan" menu on the thermostat control panel. From there, you can select the desired setting, such as "Auto" for it to run only when heating or cooling is active, or "On" to continuously circulate the air.

Is the manual of the Honeywell TrueZONE HZ322 available in English?

Yes, the manual of the Honeywell TrueZONE HZ322 is available in English .

Is your question not listed? Ask your question here

No results