Honeywell TH1110DH1003/U manual

Honeywell TH1110DH1003/U
8.4 · 3
PDF manual
 · 48 pages
English
manualHoneywell TH1110DH1003/U

Operating

Manual

PRO 1000 Series

Non-Programmable Thermostat
69-2607EFS-06
Heat Off Cool
Auto On
Fan
Cool
On
*
* Model TH1110E1000 has a larger display than shown in image.

View the manual for the Honeywell TH1110DH1003/U here, for free. This manual comes under the category thermostat and has been rated by 3 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Honeywell TH1110DH1003/U or do you need help? Ask your question here

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 7
L
LindaJanuary 10, 2024

I set my thermostat at 72. It reads 67on.why won't it stay at 72..I had to turn it off then on before the heater kicked on. Now it's reading 72

I set my thermostat at 72. It reads 67on.why won't it stay at 72..I had to turn it off then on before the heater kicked on. N...
zoom-in
View photo
1 comment
E
Emma of manua.lsFebruary 13, 2024

The Honeywell TH1110DH1003/U thermostat may not remain at the set temperature for several reasons. Here are some troubleshooting steps you can try: 1. Check the batteries: Ensure that fresh AAA alkaline batteries are correctly installed in the thermostat. 2. Verify the system switch setting: Set the system switch to "Heat" if you want to use the heating function, or "Cool" if you want to use the cooling function. Make sure that the temperature setting is higher than the current indoor temperature for heating, or lower for cooling. 3. Wait for the system to respond: After adjusting the temperature, wait for approximately 5 minutes for the heating or cooling system to respond. 4. Check the circuit breaker: Confirm that the circuit breaker associated with the heating and cooling system is not tripped. If it is tripped, reset it. 5. Ensure power switch is on: Make sure that the power switch on the heating and cooling system is turned on. 6. Secure the furnace door: Verify that the furnace door is tightly closed.

This answer is automatically generated
K
KaylaNovember 22, 2023

I changed my batteries in my thermostat now I need to know how to reset it so I can get heat back on

Y
yvonne sheffieldApril 9, 2024

I don't understand how to change temp it only goes up to 35

A
Anthony Morrison August 7, 2023

Display is blank. I changed the batteries today.

C
Carlos AcostaFebruary 23, 2023

Como lo configuro en celsius

I
Ivan March 25, 2023
1 comment
I
Ivan March 25, 2023

Airhandler (heat pump) is not turning on. I reset the thermostat already.

Airhandler (heat pump) is not turning on. I reset the thermostat already.
zoom-in
View photo
I
IvanMarch 25, 2023

The Honeywell TH1110DH1003/U is a programmable thermostat designed to help regulate the temperature in your home or office space. It features a digital display that allows you to easily read and adjust the temperature settings, with a 24-hour clock that can help you save energy by automatically reducing heating or cooling during non-peak hours. The device is compatible with most heating and cooling systems and can be programmed to provide four periods of temperature control throughout the day. With its intuitive design and simple interface, the Honeywell TH1110DH1003/U makes it easy to adjust the temperature to your desired comfort level. Its energy-saving features, including the ability to set different temperature modes based on the time of day, can help reduce energy costs and save you money on your heating and cooling bills. The device is built with durable materials and is designed to provide reliable performance over time. Additionally, it comes with a 1-year limited warranty so that you can have peace of mind about the quality of the product. Overall, the Honeywell TH1110DH1003/U provides a cost-effective, easy-to-use solution for temperature control in your home or office.

General
BrandHoneywell
ModelTH1110DH1003/U
Productthermostats
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell TH1110DH1003/U below.

Where is the best location to place the thermostat?

The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.

What is the dead band of a thermostat?

If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

How do I adjust the temperature on my Honeywell TH1110DH1003/U thermostat?

To adjust the temperature, simply press the up or down arrow buttons on the thermostat until you reach your desired temperature.

How can I switch between heating and cooling mode on the thermostat?

To switch between heating and cooling mode, press the mode button on the thermostat until the desired mode (heat or cool) is displayed on the screen.

How do I set a program schedule for my thermostat?

To set a program schedule, press the program button on the thermostat, then use the arrow buttons to select your desired days and time periods. Finally, adjust the temperature settings for each time period to create your customized program schedule.

How can I override the program schedule and manually control the temperature?

To override the program schedule and manually control the temperature, press the hold button on the thermostat. This will hold the current temperature setting until you manually change it or resume the program schedule.

What should I do if the thermostat is not displaying anything or is unresponsive?

If the thermostat is not displaying anything or is unresponsive, first check if the batteries need to be replaced. If that doesn't solve the issue, make sure the thermostat is properly connected to the power source or consult a professional for further assistance.

Is the manual of the Honeywell TH1110DH1003/U available in English?

Yes, the manual of the Honeywell TH1110DH1003/U is available in English .

Is your question not listed? Ask your question here

No results