View the manual for the Honeywell TB8220U here, for free. This manual comes under the category thermostat and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Honeywell TB8220U or do you need help? Ask your question here
The Honeywell TB8220U thermostat is an advanced heating and cooling control system designed for commercial and residential use. It offers precise temperature control to optimize comfort and energy efficiency. The TB8220U features a large backlit display that makes it easy to read and adjust the thermostat settings. With its intuitive menu-driven programming, users can effortlessly set up a personalized schedule to match their heating and cooling needs throughout the day. This thermostat is compatible with a wide range of HVAC systems, including heat pumps, conventional systems, and multi-stage systems. It offers a variety of configurable options, such as fan operation, system type, and keypad lockout for added flexibility and customization. In addition, the Honeywell TB8220U boasts adaptive recovery technology, which calculates the necessary pre-heating or pre-cooling time to reach the desired temperature at the scheduled time, allowing for maximum comfort while minimizing energy usage. The thermostat is also equipped with a battery backup to retain programming during power outages, ensuring that settings are not lost. With its sleek design and easy-to-use interface, the Honeywell TB8220U thermostat is an excellent choice for those looking to enhance their heating and cooling control system in a reliable and efficient manner.
| Brand | Honeywell |
| Model | TB8220U |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell TB8220U below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
In order to change the temperature, you can navigate to the "Menu" button on the thermostat and use the arrow keys to select the "Temperature Setpoint" option. From there, you can adjust the temperature to your desired setting.
To program a schedule, press the "Schedule" button on the thermostat, and then use the arrow keys to select the specific day of the week you want to program. Once selected, you can set the desired temperature for different time periods throughout the day.
Yes, you can adjust the fan operation by pressing the "Fan" button on the thermostat. From there, you can choose between "Auto" or "On" mode, where "Auto" means the fan will only run when heating or cooling is needed, while "On" means the fan will run continuously.
To switch between heating and cooling modes, press the "Mode" button on the thermostat. Continue pressing the button until you reach the desired mode, which can be either "Heat," "Cool," or "Auto" (for automatic switching between heating and cooling based on set temperature).
Yes, you can lock the thermostat by pressing and holding the "Menu" and "Fan" buttons simultaneously for a few seconds. This will activate the security lock feature, preventing any changes to the thermostat's settings until the lock is released by repeating the same procedure.
Yes, the manual of the Honeywell TB8220U is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 3how do i put the thermostat on permanent hold, or how do i set it for 50 degrees and never change?
To confirm the meanings of the heat and cold values - the Heat temperature value is the temperature at which the temperature needs to drop to before the heat turns on. Like-wise the cold value is the temperature that the heat needs to rise before it will shut off
Can you adjust the brightness of the backlight?