Honeywell T834N1002/U manual

Honeywell T834N1002/U
8.4 · 2
PDF manual
 · 16 pages
English
manualHoneywell T834N1002/U

Owner’s Manual

English: Page 1

Mode d’emploi

Français : Page 6

Manual de Uso

Español: Página 11

T822/T827 Series

Thermostat
® U.S. Registered Trademark. Patents pending.
Copyright © 2019 Resideo Technologies Inc.
All rights reserved.
M37965
69-2251EFS-03
Check package contents:
• Thermostat
Wall anchors & screws (2 each)
Before you begin, make sure you have:
No. 2 Phillips & small pocket screwdrivers
• Hammer
Level (optional)
• Pencil
Drill
and bit (3/16” for drywall, 7/32” for
plaster)
Pre-installation checklist
This manual covers the following models*:T822K,L • T827K* Images are for reference only and may not represent the actual thermostat.
Must be installed by a trained, experienced technician
Read these instructions carefully. Failure to follow these instructions can damage the product or cause a hazardous condition.
CAUTION: ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect power before
beginning installation.
MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed tube, do not
place the old control in the trash. Contact your local waste management authority for
instructions regarding recycling and proper disposal.

View the manual for the Honeywell T834N1002/U here, for free. This manual comes under the category thermostat and has been rated by 2 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Honeywell T834N1002/U or do you need help? Ask your question here

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
S
Sandra June 21, 2023

How can I connect the switch again for the on auto fan switch?

How can I connect the switch again for the on auto fan switch?
zoom-in
View photo

The Honeywell T834N1002/U thermostat is a home temperature control device designed for heating and cooling systems. It is intended to be used in the United States with English language settings (en_US). This thermostat is specifically built to regulate and maintain desired indoor temperatures in a reliable and efficient manner. It is equipped with a clear and easy-to-read digital display, allowing users to conveniently monitor and adjust the temperature settings as needed. The Honeywell T834N1002/U thermostat is suitable for use with a wide range of heating and cooling systems, including single-stage heating and cooling systems, heat pumps with auxiliary heat, and electric furnaces. Its compatibility with a variety of systems makes it a versatile choice for many households. With its straightforward installation process, the Honeywell T834N1002/U thermostat can easily be mounted on the wall of a home. Once installed, it offers precise temperature control, enabling users to create a comfortable living environment with minimal effort. Made from durable materials, this thermostat is designed to withstand the test of time, providing long-lasting performance and reliability. The Honeywell T834N1002/U is engineered to optimize energy usage, helping to reduce energy consumption and potentially lower utility bills. In summary, the Honeywell T834N1002/U thermostat is an effective and efficient temperature control device for home heating and cooling systems. Its user-friendly features, wide compatibility, and durability make it a reliable choice for many households.

General
BrandHoneywell
ModelT834N1002/U
Productthermostats
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell T834N1002/U below.

Where is the best location to place the thermostat?

The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.

What is the dead band of a thermostat?

If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

How do I set the desired temperature on my Honeywell T834N1002/U thermostat?

To set the desired temperature, simply press the up or down arrows on the thermostat until you reach your desired temperature.

Why is my thermostat not turning on the heating or cooling system?

There could be a couple of reasons for this. First, check if the thermostat is set to the correct mode (heat, cool, or off) by pressing the mode button. Also, ensure that the temperature setting is higher or lower than the current room temperature, depending on the desired heating or cooling mode.

How can I adjust the thermostat's swing or differential setting?

The swing or differential setting controls the temperature range in which the heating or cooling system operates. To adjust it, go to the setup menu on your thermostat and navigate to the "Swing" or "Differential" option. Use the up or down arrows to increase or decrease the value until you find a comfortable range.

How can I override the programmed schedule on my thermostat and manually control the temperature?

If you need to temporarily override the programmed schedule, press the "Hold" or "Temporary Override" button on your thermostat. This will allow you to manually set the desired temperature until the next scheduled program period. After the override period ends, the thermostat will revert to its normal programming.

What should I do if my thermostat display is not functioning correctly?

If you encounter display issues, try resetting the thermostat by removing it from its wall plate and disconnecting the power for a few minutes. Then, reconnect the thermostat and observe if the display returns to normal. If the issue persists, it may require professional assistance to diagnose and resolve the problem.

Is the manual of the Honeywell T834N1002/U available in English?

Yes, the manual of the Honeywell T834N1002/U is available in English .

Is your question not listed? Ask your question here

No results