View the manual for the Honeywell RTH9585WF1004 here, for free. This manual comes under the category thermostat and has been rated by 8 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Honeywell RTH9585WF1004 or do you need help? Ask your question here




The Honeywell RTH9585WF1004 thermostat is a home heating and cooling device designed to provide efficient climate control. This thermostat features a sleek and modern design that can seamlessly blend with any interior decor. Its Wi-Fi capability allows users to control their home's temperature remotely using their smartphone, tablet, or computer. The Honeywell RTH9585WF1004 thermostat is specifically designed to be compatible with the majority of heating and cooling systems, including heat pumps, gas furnaces, and electric heating systems. It offers a user-friendly interface with a customizable color touchscreen display, making it easy to navigate and adjust settings. With its advanced programming capabilities, this thermostat can create a personalized schedule to optimize energy usage and save on utility bills. It also has a Smart Response feature that learns the preferred temperature settings and adapts accordingly. The Honeywell RTH9585WF1004 thermostat has intelligent alerts that notify users about various system issues, such as filter changes or maintenance requirements. It is equipped with geofencing technology, which allows the thermostat to automatically adjust the temperature based on the occupants' location. This thermostat also has voice control compatibility, allowing users to adjust temperature settings using popular voice assistants, such as Amazon Alexa or Google Assistant. Overall, the Honeywell RTH9585WF1004 thermostat provides reliable and convenient climate control for homes, with its user-friendly interface, energy-saving features, and compatibility with a wide range of heating and cooling systems.
| Brand | Honeywell |
| Model | RTH9585WF1004 | RTH9585WF1004 |
| Product | thermostats |
| EAN | 0085267911313 |
| Language | English |
| Filetype | User manual (PDF), Quickstart Guide (PDF), Installation Guide (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell RTH9585WF1004 below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
Simply go to the thermostat settings menu, and select the "Wi-Fi Setup" option. Follow the on-screen prompts to connect the thermostat to your Wi-Fi network.
Press the "Up" or "Down" arrow buttons on the thermostat's display to adjust the temperature setpoint to your desired level. The changes will be saved automatically.
Firstly, ensure that the thermostat is powered on. If it is, try resetting it by pressing the "Menu" button, then selecting "Preferences," and finally choosing "Restore Factory Defaults." If the issue persists, you might need to check the wiring connections or contact customer support for further assistance.
Press the "Menu" button, select "Program," and then choose "Schedule." From there, you can set different temperature settings for various times of the day. Make sure to save your changes once you've finished programming the schedule.
Absolutely! Download and install the Honeywell Home app on your smartphone, create an account, and then follow the app's instructions to pair it with your thermostat. Once paired, you can control and adjust your thermostat from anywhere as long as you have an internet connection.
Yes, the manual of the Honeywell RTH9585WF1004 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 211Why does my t-stat not read the inside temp anymore? My heater runs constant now at 70* setpoint. When i shut it down and unplug 30 secs, it reads a higher temp & stays off until it reaches setpoint, and the cycle begins again until I unplug t-stat
1 comment
The temperature reading issue on your Honeywell RTH9585WF1004 thermostat may be caused by a few factors. Here are some troubleshooting steps you can try: 1. Check the power: Make sure the circuit breaker is not tripped and the power switch at the heating and cooling system is turned on. Also, ensure that the furnace door is securely closed. 2. Verify the C wire connection: The C wire provides power to the thermostat. Ensure that the C wire is properly connected. 3. System setup settings: Check the "Your thermostat controls" or "Your system type" setting on the System Setup screen to ensure it matches your heating and cooling equipment. 4. Fan control setting: Verify that the "Your fan control" setting on the System Setup screen is set correctly for your heating equipment. 5. Compressor protection feature: If the thermostat displays "Wait," wait for 5 minutes to allow the system to restart safely without damaging the compressor. 6. Changeover valve configuration: If your heat pump is blowing cool air in heat mode or warm air in cool mode, check the "Type of changeover valve" setting on the System Setup screen to ensure it is properly configured for your system. 7. Check temperature settings: Make sure the temperature setting is higher than the current inside temperature when setting the system to Heat, and lower than the inside temperature when setting it to Cool. If the issue persists after trying these steps, please contact customer support for further assistance.
This answer is automatically generatedI am replacing Carrier Thermostat with RTH9585. Old unit has six wires--WOGRCY. What are the proper connections for these wires on the new unit?
2 comments
To determine which wires should be connected to the new Honeywell RTH9585WF1004 thermostat for the letters WOGRCY, please follow these steps: 1. Find the terminal block on the thermostat. 2. Identify the corresponding terminals for each letter: - W: This is for the heating wire. - O: This is for the reversing valve wire for heat pumps. - G: This is for the fan wire. - R: This is for the power wire. - C: This is for the common wire. - Y: This is for the cooling wire. 3. Connect the wires from your HVAC system to the corresponding terminals on the thermostat, following the color-coding or labeling of the wires.
This answer is automatically generatedI am replacing Carrier Thermostat with RTH9585. Old unit has six wires--WOGRCY. What are the proper connections for these wires on the new unit?
Is there a remote sensor I can connect to my thermostat? I have a Honeywell Home RTH9585WF1004 Wi-Fi Smart Color Thermostat. It is connected to the internet but the outdoor temps vary from app to app to thermostat and I would like to know what the ~temp is outside my home.
2 comments
Yes, there is a remote sensor that you can connect to your Honeywell Home RTH9585WF1004 Wi-Fi Smart Color Thermostat. By connecting the remote sensor, you can monitor the temperature outside your home.
This answer is automatically generatedSame unit, same question??
I have an old White Rodger’s thermostat with only 4 wires and a jumper. Can I connect your RTH9585WE with the existing wires? Photo below.
1 comment
Yes, you can connect the Honeywell RTH9585WF1004 thermostat with the existing wires of your old White Rodger's thermostat that has only 4 wires and a jumper. Here are the steps to follow: 1. Make sure you have a C wire or equivalent. 2. Attach the thermostat to the wallplate. 3. If your old thermostat had both an R and Rc wire, unplug the jumper loop. 4. If your old thermostat had both an R and RH wire, connect the R wire to the Rc terminal, the RH wire to the R terminal, and unplug the jumper loop. 5. If your old thermostat had both V and VR wires, you can refer to the Honeywell website for help. 6. If your old thermostat had separate O and B wires and is controlling a single zone heat pump system, attach the B wire to the C terminal. If there is more than one thermostat controlling the system, you may need to contact Resideo zoning for wiring assistance. 7. If your old thermostat had separate Y1, W1, and W2 wires, you can refer to the Honeywell website for help. 8. If the old thermostat has separate wires on Aux and E, use a wire nut to attach both wires to a separate wire. Slide this third wire into the W2-Aux/E terminal.
This answer is automatically generatedMy panel is not displaying at times and when it does the temperature that is set is different from the actual temperature display on screen. Has this unit gone bad. It started doing this today. How do I fix this.
1 comment
The Honeywell RTH9585WF1004 thermostat has a manual available in English. However, I couldn't find specific information about the panel not displaying at times and the temperature being different from the actual temperature. To solve this problem, you can try these steps: 1. Check the power supply: Make sure the thermostat is getting power. Check if the display is lit up and if there are any error messages indicating a power issue. 2. Restart the thermostat: Try restarting the thermostat by removing it from the wall plate and disconnecting the power for a few minutes. Then, reconnect the thermostat and see if the issue persists. 3. Check the wiring: Ensure that the thermostat is properly wired and connected to the HVAC system. Make sure all wires are securely connected and not damaged. 4. Reset the thermostat: If the issue continues, you can try resetting the thermostat to its factory settings. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Honeywell customer support for further assistance. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific model of the thermostat.
This answer is automatically generatedIs there a battery? If so, where is it located? I've had this thermostat for a couple of years and it just started crashing and losing connection. It's currently on and set to 70, but the temperature is 65. It won't respond. I've checked breakers, furnace, everything.
This message has been automatically translatedI have a rth9585wf1004 thermostat doesn't have auto changeover listed in mode how do I get it in auto changeover
I own a honeywell home rth9585wf1004 which was left by the previous owner of the house. Im trying to connect to the total connect comfort app but I can't set it up because the previous owners never delete there account. Any suggestions on how to resolve this problem????