View the manual for the Honeywell RTH9585 here, for free. This manual comes under the category thermostat and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Honeywell RTH9585 or do you need help? Ask your question here
The Honeywell RTH9585 is a thermostat designed to regulate the temperature in your home. It offers precise and programmable control, allowing you to set your desired temperature at different times of the day. With its customizable schedule, you can program the thermostat to automatically adjust the temperature based on your daily routine. This can help you save energy and reduce your utility bills. The thermostat also features a touchscreen display, making it easy to navigate and operate. The RTH9585 is compatible with most heating, cooling, and heat pump systems, ensuring it can be integrated seamlessly into your existing setup. It also offers Wi-Fi connectivity, allowing you to control the thermostat remotely through your smartphone or tablet. This thermostat has intelligence built-in, with features such as adaptive recovery, which learns how long it takes to reach your desired temperature and adjusts accordingly. It also has smart response technology, which learns your temperature preferences and adjusts the heating or cooling to maintain your comfort. In addition, the RTH9585 has a large, backlit display that makes it easy to read the temperature and settings, even in low light conditions. It also includes a filter change reminder, ensuring that you stay on top of maintenance. Overall, the Honeywell RTH9585 is a reliable and user-friendly thermostat that offers precise temperature control and energy-saving features.
| Brand | Honeywell |
| Model | RTH9585 |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell RTH9585 below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
To resolve the issue when the compressor protection feature is engaged and the thermostat displays "waiting for equipment," follow these steps: 1. Wait for 5 minutes to allow the system to restart safely without damaging the compressor. 2. Check the System Setup screen to ensure that the "Type of changeover valve" is properly configured for your system. 3. If the thermostat is set to Heat, touch MODE to switch the system to Cool and set the temperature lower than the Inside temperature. 4. If the thermostat is set to Cool, touch MODE to switch the system to Heat and set the temperature higher than the Inside temperature. 5. Verify that the circuit breaker is not tripped and reset if necessary. 6. Ensure the power switch at the heating and cooling system is turned on. 7. Confirm that the furnace door is securely closed. 8. Check if the C wire is connected properly. 9. Make sure the System Setup screen settings match your heating and cooling equipment.
To troubleshoot if the heat pump is issuing cool air in heat mode or warm air in cool mode with the Honeywell RTH9585 thermostat, follow these steps: 1. Check the circuit breaker and reset if necessary. 2. Ensure the power switch at the heating and cooling system is on. 3. Make sure the furnace door is securely closed. 4. Verify that the C wire is connected. 5. Check the System Setup screen settings to match your heating and cooling equipment. 6. Ensure the fan control setting matches your heating equipment. 7. Wait for 5 minutes for the compressor protection feature to reset. 8. Adjust the changeover valve setting if needed. 9. Set the thermostat to Heat mode with a higher temperature or Cool mode with a lower temperature. 10. If "Wait" is displayed, wait for 5 minutes before restarting the system. These steps should help resolve the issue with the heat pump.
Yes, the manual of the Honeywell RTH9585 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 2I want to make the thermostat as dim as possible. How do I do that?
Why does my whole screen sometimes turn red?