Honeywell RTH6300B manual

Honeywell RTH6300B
8.2 · 1
PDF manual
 · 24 pages
English
manualHoneywell RTH6300B
Operating
Manual
RTH6300B
Programmable Thermostat

View the manual for the Honeywell RTH6300B here, for free. This manual comes under the category thermostat and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Honeywell RTH6300B or do you need help? Ask your question here

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Honeywell RTH6300B thermostat is an advanced and efficient temperature control device designed for residential use. This thermostat offers precise and accurate temperature regulation for enhanced comfort and energy savings. With its sophisticated programming capabilities, the Honeywell RTH6300B allows users to set customized temperature schedules based on their preferences and daily routines. This feature helps optimize energy usage by automatically adjusting temperatures when occupants are away or asleep. Equipped with a backlit digital display, the thermostat provides easy readability and intuitive operation. The display shows current temperature, set temperature, and other relevant information. This user-friendly design enhances convenience and ensures effortless control. The Honeywell RTH6300B thermostat is compatible with a wide range of heating and cooling systems, including gas furnaces, heat pumps, and central air conditioning units. It offers precise temperature control with an accuracy of +/- 1 degree Fahrenheit. For added convenience, the thermostat features a temporary override setting that allows users to manually adjust the temperature for a specific period without affecting the programmed schedule. This feature is particularly useful during unexpected weather changes or special occasions. In terms of installation, the Honeywell RTH6300B is designed for easy setup and can be mounted on the wall or placed on a tabletop using the provided stand. It comes with detailed instructions and is compatible with the standard 4-wire configuration commonly found in most homes. In conclusion, the Honeywell RTH6300B thermostat offers reliable and precise temperature control with advanced programming features, enhancing comfort and energy efficiency in residential settings.

General
BrandHoneywell
ModelRTH6300B
Productthermostats
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell RTH6300B below.

Where is the best location to place the thermostat?

The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.

What is the dead band of a thermostat?

If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

How do I override the temperature control on the Honeywell RTH6300B thermostat?

To override the temperature control on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "+" or "-" button to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. 2. The new temperature you set will be maintained until the next programmed time period begins. For example, if you want to turn up the heat early in the morning, it will automatically be lowered later when you leave for the day. 3. If you want to cancel the temporary setting at any time, press the "Run Schedule" button. To permanently adjust the temperature and override the temperature settings for all time periods, follow these steps: 1. Press the "Hold" button to enter the "Hold" mode. This turns off the program schedule and allows you to manually adjust the thermostat as needed. 2. Whatever temperature you set in the "Hold" mode will be maintained 24 hours a day until you manually change it or press the "Run Schedule" button to cancel the "Hold" mode and resume the programmed schedule. Note: Make sure the thermostat is set to the system (heat or cool) you want to control before adjusting the temperature. Please let me know if you need further assistance.

How do I set the time and day on the Honeywell RTH6300B thermostat?

To set the time and day on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "Set Clock/Day/Schedule" button on the thermostat. 2. Use the "+" or "-" button to adjust the clock time to the desired hour and minute. 3. Press the "Set Day" button to select the current day of the week. Use the "+" or "-" button to scroll through the days. 4. Press the "Done" button to save and exit the time and day settings. Note: If the "Set Clock/Day/Schedule" option is not displayed, press the "Done" or "Run Schedule" button to access it. By following these steps, you will be able to set the time and day on your Honeywell RTH6300B thermostat accurately. If you have any further questions or need assistance, please let me know.

How do I change the fan setting on the Honeywell RTH6300B thermostat?

To change the fan setting on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "Set Clock/Day/Schedule" button on the thermostat. 2. Use the "+" or "-" button to adjust the clock time to the desired hour and minute. 3. Press the "Set Day" button to select the current day of the week. Use the "+" or "-" button to scroll through the days. 4. Press the "Done" button to save and exit the time and day settings. To change the fan setting, follow these additional steps: 1. Press the "Fan" button on the thermostat. 2. Use the "+" or "-" button to select either "Auto" or "On" mode. - In "Auto" mode, the fan runs only when the heating or cooling system is on. - In "On" mode, the fan runs continuously. 3. Press the "Set Clock/Day/Schedule" button to save the fan setting. By following these steps, you will be able to change the fan setting on your Honeywell RTH6300B thermostat. If you have any further questions or need assistance, please let me know.

How do I change the system setting (Heat/Cool) on the Honeywell RTH6300B thermostat?

To change the system setting (Heat/Cool) on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "Set Clock/Day/Schedule" button on the thermostat. 2. Use the "+" or "-" button to adjust the clock time to the desired hour and minute. 3. Press the "Set Day" button to select the current day of the week. 4. Press the "Done" button to save and exit the time and day settings. To change the system setting, follow these additional steps: 1. Press the "System" button on the thermostat. 2. Use the "+" or "-" button to select either "Heat" or "Cool" mode. - In "Heat" mode, the thermostat will only activate the heating system. - In "Cool" mode, the thermostat will only activate the cooling system. 3. Press the "Set Clock/Day/Schedule" button to save the system setting. By following these steps, you will be able to change the system setting (Heat/Cool) on your Honeywell RTH6300B thermostat. If you have any further questions or need assistance, please let me know.

How do I override the programmed temperature settings on the Honeywell RTH6300B thermostat?

To override the programmed temperature settings on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "+" or "-" button to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. 2. The new temperature you set will be maintained until the next programmed time period begins. For example, if you want to turn up the heat early in the morning, it will automatically be lowered later when you leave for the day. 3. If you want to cancel the temporary setting at any time, press the "Run Schedule" button. To permanently adjust the temperature and override the programmed settings for all time periods, follow these steps: 1. Press the "Hold" button to enter the "Hold" mode. This turns off the program schedule and allows you to manually adjust the thermostat as needed. 2. Whatever temperature you set in the "Hold" mode will be maintained 24 hours a day until you manually change it or press the "Run Schedule" button to cancel the "Hold" setting and resume the programmed schedule. Note: Make sure the thermostat is set to the system (heat or cool) you want to control before adjusting the temperature. These steps will allow you to override the programmed temperature settings on the Honeywell RTH6300B thermostat as needed.

How do I replace the battery in the Honeywell RTH6300B thermostat?

To replace the battery in the Honeywell RTH6300B thermostat, follow these steps: 1. When the "Replace Battery" warning begins flashing on the thermostat, it indicates that the batteries are running low. This warning typically appears about two months before the batteries are depleted. 2. Even if the warning does not appear, it is recommended to replace the batteries once a year or before leaving home for more than a month. 3. Press down and pull to remove the battery holder from the thermostat. 4. Insert fresh AA alkaline batteries into the battery holder. 5. Reinstall the battery holder back into the thermostat. By following these steps, you can easily replace the battery in the Honeywell RTH6300B thermostat. It is important to replace the batteries promptly to ensure proper functioning of the thermostat.

How do I set the time and day on the Honeywell RTH6300B thermostat?

To set the time and day on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "Set Clock/Day/Schedule" button on the thermostat. Use the "+" or "-" button to adjust the clock time to the desired hour and minute. 2. Press the "Set Day" button, then use the "+" or "-" button to select the current day of the week. 3. Press the "Done" button to save and exit the time and day settings. Note: If the "Set Clock/Day/Schedule" option is not displayed, press the "Done" or "Run Schedule" button to access it. By following these steps, you can easily set the time and day on the Honeywell RTH6300B thermostat. It is important to ensure that the time and day are accurately set for proper scheduling and operation of the thermostat.

How do I change the fan setting on the Honeywell RTH6300B thermostat?

To change the fan setting on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "Fan" button on the thermostat. 2. Use the "+" or "-" button to select between "Auto" or "On" mode. - In "Auto" mode, the fan will run only when the heating or cooling system is on. This is the most commonly used setting. - In "On" mode, the fan will run continuously. This setting can be used for improved air circulation or more efficient air cleaning. 3. Press the "Set Clock/Day/Schedule" button to exit the fan setting mode. By following these steps, you can easily change the fan setting on the Honeywell RTH6300B thermostat. Select the mode that suits your preference and needs for optimal comfort and air circulation in your home.

How do I change the system setting (Heat/Cool) on the Honeywell RTH6300B thermostat?

To change the system setting (Heat/Cool) on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "System" button on the thermostat. 2. Use the "+" or "-" button to select between "Heat" or "Cool" mode. - In "Heat" mode, the thermostat will control the heating system to maintain the desired temperature. - In "Cool" mode, the thermostat will control the cooling system to maintain the desired temperature. 3. Press the "Set Clock/Day/Schedule" button to exit the system setting mode. By following these steps, you can easily change the system setting on the Honeywell RTH6300B thermostat. Select the mode that corresponds to your heating or cooling needs for optimal comfort in your home.

How do I override the programmed temperature on the Honeywell RTH6300B thermostat?

To override the programmed temperature on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "+" or "-" button to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. 2. The new temperature you set will be maintained until the next programmed time period begins. For example, if you want to turn up the heat early in the morning, it will automatically be lowered later when you leave for the day. 3. If you want to cancel the temporary setting at any time, press the "Run Schedule" button. If you want to permanently adjust the temperature and override the programmed schedule for all time periods, follow these steps: 1. Press the "Hold" button to permanently adjust the temperature. This will turn off the program schedule and allow you to manually adjust the thermostat as needed. 2. Whatever temperature you set will be maintained 24 hours a day until you manually change it or press the "Run Schedule" button to cancel the "Hold" setting and resume the programmed schedule. Note: Make sure the thermostat is set to the system (heat or cool) you want to control.

How do I set the time and day on the Honeywell RTH6300B thermostat?

To set the time and day on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "Set" button on the thermostat to enter the programming mode. 2. Use the "+" or "-" buttons to navigate to the "Time" option on the display. 3. Once you have selected the "Time" option, press the "Set" button again to enter the time setting mode. 4. Use the "+" or "-" buttons to adjust the hour. Press the "Set" button to confirm and move to the minute setting. 5. Use the "+" or "-" buttons to adjust the minute. Press the "Set" button to confirm and move to the day setting. 6. Use the "+" or "-" buttons to select the correct day of the week. Press the "Set" button to confirm and exit the programming mode. Note: The thermostat uses a 12-hour clock format, so make sure to set the correct AM or PM time. If you make a mistake, you can repeat the steps to adjust the time and day settings.

How do I change the fan setting on the Honeywell RTH6300B thermostat?

To change the fan setting on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "Fan" button on the thermostat to access the fan settings. 2. Use the "+" or "-" buttons to select between "Auto" or "On" mode for the fan. - In "Auto" mode, the fan will run only when the heating or cooling system is on. This is the most commonly used setting. - In "On" mode, the fan will run continuously. This setting can be used for improved air circulation or more efficient air cleaning. 3. Press the "Set Clock/Day/Schedule" button to confirm the fan setting. Note: The fan setting can be adjusted at any time to suit your preferences.

How do I change the system setting on the Honeywell RTH6300B thermostat?

To change the system setting on the Honeywell RTH6300B thermostat, follow these steps: 1. Press the "System" button on the thermostat to access the system settings. 2. Use the "+" or "-" buttons to navigate between different system options, such as "Heat," "Cool," or "Off." 3. Select the desired system setting by pressing the "System" button when the desired option is displayed. - If you want to use the heating system, select "Heat." - If you want to use the cooling system, select "Cool." - If you want to turn off both the heating and cooling systems, select "Off." 4. Press the "Set Clock/Day/Schedule" button to confirm the system setting. Note: Make sure to select the appropriate system setting based on your heating or cooling needs. The thermostat will control the selected system accordingly.

Is the manual of the Honeywell RTH6300B available in English?

Yes, the manual of the Honeywell RTH6300B is available in English .

Is your question not listed? Ask your question here

No results