Honeywell RTH5160D1003/E manual

Honeywell RTH5160D1003/E
9.8 · 2
PDF manual
 · 32 pages
English
manualHoneywell RTH5160D1003/E

RTH5160 Series

Non-Programmable
Thermostat

Quick Installation Guide

Tools you will need Tools you may need

Wire stripper
Needle-nose pliers
Drill and
drill bit (7/32 in)

Included in your box

Screws and
anchors
UWP™
Mounting
System
(UWP)
RTH5160
Thermostat
Quick Install Guide
Small flat head scr
ewdriver
Phillips scr
ewdriver
Pencil
Level

View the manual for the Honeywell RTH5160D1003/E here, for free. This manual comes under the category thermostat and has been rated by 2 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Honeywell RTH5160D1003/E or do you need help? Ask your question here

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
P
Phil WhitefootJune 4, 2024

I have a RTH5160D1003 thermostat that has been working in our house for several years. My wife attempted to shut the AC off and the thermostat changed from Fahrenheit to Celsius. What do I need to do to correct back to Fahrenheit?

S
Sam ulstadJune 11, 2024

Fresh batteries and thermostat won't respond to "menu" pad

D
Dennis Joseph DupreJune 5, 2024

how to change temperature

T
tomMay 13, 2024

how do you change from Celsius to fahrenheit

1 comment
K
kathyMay 20, 2024

How do I change from heat to cool. how do I turn the fan off

The Honeywell RTH5160D1003/E is a thermostat designed for residential use. It is compatible with most heating, cooling, and heat pump systems, making it a versatile option for many homes. With a large, easy-to-read display, it allows users to easily monitor and adjust their home's temperature settings. One of the key features of the RTH5160D1003/E is its programmable functionality. Users can create customized schedules to automatically adjust the temperature throughout the day, helping to save energy and reduce utility costs. This thermostat also has a "Smart Response" feature, which learns how long it takes to heat or cool a room and automatically adjusts the temperature accordingly. The RTH5160D1003/E also includes a filter change reminder, ensuring that the air in the home stays clean and fresh. It also has a vacation mode, allowing users to set an extended temporary temperature setting while they are away. Installation of the RTH5160D1003/E is relatively straightforward, with clear instructions provided. It can be either mounted on the wall or placed on a tabletop. The thermostat is battery-powered, with the option for hardwiring for continuous power. Overall, the Honeywell RTH5160D1003/E is a reliable and user-friendly thermostat that offers functionality and convenience for homeowners. Its programmable features, large display, and compatibility with various systems make it a practical choice for maintaining optimal comfort and energy efficiency in the home.

General
BrandHoneywell
ModelRTH5160D1003/E
Productthermostats
EAN085267461450
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell RTH5160D1003/E below.

Where is the best location to place the thermostat?

The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.

What is the dead band of a thermostat?

If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

How do I install the Honeywell RTH5160D1003/E thermostat?

To install the Honeywell RTH5160D1003/E thermostat, follow these steps: 1. Gather the necessary tools: wire stripper, needle-nose pliers, drill and drill bit (7/32 in), small flat head screwdriver, Phillips screwdriver, pencil, and level. 2. Turn off the power to your heating and cooling system at the circuit breaker. 3. Remove the old thermostat from the wall by gently pulling it away from the mounting plate. 4. Take note of the wires connected to the old thermostat and label them according to their corresponding terminals (e.g., R, C, W, Y, G). 5. Install the UWP™ (Universal Wall Plate) mounting system by attaching it to the wall using the screws and anchors provided. 6. Connect the wires from your heating and cooling system to the corresponding terminals on the UWP. 7. Attach the Honeywell RTH5160D1003/E thermostat to the UWP by aligning the pins and pressing it firmly into place. 8. Turn on the power to your heating and cooling system at the circuit breaker. 9. Follow the on-screen prompts to set up the thermostat, including selecting your desired temperature settings and programming options. 10. Test the thermostat by adjusting the temperature and ensuring that your heating and cooling system responds accordingly. By following these steps, you can successfully install the Honeywell RTH5160D1003/E thermostat and enjoy its benefits.

What tools do I need for the installation of the Honeywell RTH5160D1003/E thermostat?

To install the Honeywell RTH5160D1003/E thermostat, you will need the following tools: 1. Wire stripper: This tool is used to remove the insulation from the wires. 2. Needle-nose pliers: These pliers are helpful for bending and manipulating wires. 3. Drill and drill bit (7/32 in): You will need a drill to create holes for mounting the thermostat. 4. Small flat head screwdriver: This screwdriver is used to tighten or loosen screws. 5. Phillips screwdriver: This screwdriver is used for screws with a cross-shaped head. 6. Pencil: You can use a pencil to mark the position for drilling holes. 7. Level: A level is useful for ensuring that the thermostat is mounted straight. Here are the installation steps: 1. Confirm wiring matches snapshot: Compare the wiring terminals of the thermostat with the photo you took earlier. 2. Mount the UWP and close the door: Use the provided screws to secure the UWP (Universal Wall Plate) on the wall. Install all three screws for a secure fit. Close the door after installation. 3. Connect remaining wires: Depress the tabs on the UWP and insert the wires into the corresponding terminals. Each wire should be placed in a separate terminal. Verify that the wires are securely in place by gently tugging on them. 4. Optional: If you need to release a wire, push down the corresponding terminal tab on the side of the UWP. Please note that these steps are a general guide and may vary depending on your specific installation requirements.

How do I set up the temperature indication scale on the Honeywell RTH5160D1003/E thermostat?

To set up the temperature indication scale on the Honeywell RTH5160D1003/E thermostat, follow these steps: 1. Press the "Edit" button (-) on the thermostat to enter the System Setup options. 2. Use the (-) button to change values or select from the available options. 3. Look for the System Setup number 125, which corresponds to the Temperature Indication Scale. 4. Press the (+) button to save changes and advance to the next System Setup number. 5. Set the Temperature Indication Scale to either 0 for Fahrenheit or 1 for Celsius. 6. Continue pressing the (+) button to save changes and move to the next System Setup number. 7. Repeat steps 4-6 until you have set all the desired System Setup options. 8. Once you have finished setting up all the System Setup options, press the "Done" button. 9. The thermostat will save the settings and return to the home screen. By following these steps, you can easily set up the temperature indication scale on the Honeywell RTH5160D1003/E thermostat.

How do I complete the system setup on the Honeywell RTH5160D1003/E thermostat?

To complete the system setup on the Honeywell RTH5160D1003/E thermostat, follow these steps: 1. Press the "Edit" (-) button to change values or select from available options. 2. Use the "Next" (+) button to save changes and advance to the next System Setup number. 3. Repeat steps 1 and 2 until all of the System Setup options have been set. 4. Press the "Done" button to save the settings and exit to the home screen. Here are some important System Setup options to consider: - Temperature Indication Scale: Select either Fahrenheit (0) or Celsius (1). - Heating System Type: Choose the appropriate option for your system, such as Conventional Forced Air Heat (1), Heat Pump (2), or Radiant Heat (3). - Heating Equipment Type: Select the specific equipment type your thermostat will control, such as Standard Efficiency Gas Forced Air (1) or Electric Forced Air (4). - Reversing Valve O/B: This option is only displayed if you have a Heat Pump. Choose whether the reversing valve should energize in cool (0) or heat (1). - Cool Stages / Compressor Stages: Set the number of Cool or Compressor stages your equipment has (0, 1, or 2). - Heat Stages / Backup Heat Stages: Set the number of Heat or Backup Heat stages your equipment has (1 or 2). Once you have completed the System Setup, you have finished installing and setting up your thermostat.

How do I finalize the installation and setup of the Honeywell RTH5160D1003/E thermostat?

To finalize the installation and setup of the Honeywell RTH5160D1003/E thermostat, follow these steps: 1. Confirm wiring: Compare the wiring of your thermostat with the snapshot you took during the installation process. Make sure the wires are connected to the correct terminals. 2. Mount the UWP: Use the provided screws to securely mount the UWP (Universal Wall Plate) on the wall. Install all three screws for a secure fit. Close the door after mounting. 3. Connect remaining wires: Depress the tabs on the UWP and insert the remaining wires into the corresponding terminals. Each wire should be placed in a separate terminal. Verify that the wires are securely in place by gently tugging on them. 4. System Setup options: Press the Edit (-) button on the thermostat to access the System Setup options. Use the (+) button to change values or select from available options. Press Next to save changes and move to the next System Setup number. Repeat this process until all System Setup options have been set. 5. Save and exit: Once all System Setup options have been set, press Done. The thermostat will save the settings and return to the home screen. 6. System operation settings: Proceed to the "System operation settings" section in the manual for further instructions on customizing the thermostat's operation. By following these steps, you can successfully finalize the installation and setup of the Honeywell RTH5160D1003/E thermostat.

Is the manual of the Honeywell RTH5160D1003/E available in English?

Yes, the manual of the Honeywell RTH5160D1003/E is available in English .

Is your question not listed? Ask your question here

No results