View the manual for the Honeywell RTH2410B1019/E1 here, for free. This manual comes under the category thermostat and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Honeywell RTH2410B1019/E1 or do you need help? Ask your question here
The Honeywell RTH2410B1019/E1 is a programmable thermostat that allows you to set a customized heating and cooling schedule for your home. With a clear and easy-to-use display, this thermostat allows for effortless programming and operation. Users can set up to four daily heating and cooling periods, ensuring maximum comfort and energy efficiency. This thermostat also features a filter change reminder, indicating when it's time to replace the filter for optimal performance. The Honeywell RTH2410B1019/E1 is compatible with most heating and cooling systems, including gas, oil, and electric systems, as well as heat pumps. It also comes equipped with settings for both Fahrenheit and Celsius measurements. This thermostat is powered by battery or hardwiring to your heating and cooling system, providing flexibility in installation. It's designed to maintain accurate temperature control within +/- 1 degree Fahrenheit. Overall, the Honeywell RTH2410B1019/E1 is an easy-to-use and reliable thermostat that offers programmable temperature control and energy savings for your home.
| Brand | Honeywell |
| Model | RTH2410B1019/E1 |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF), Installation Guide (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell RTH2410B1019/E1 below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
To set the temperature on the Honeywell RTH2410B1019/E1 thermostat, follow these steps: 1. Press the "s" or "t" button to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. 2. The display will show "Temporary" and the current program period will flash. 3. Use the "s" button to decrease the temperature or the "t" button to increase the temperature to your desired setting. 4. The new temperature will be maintained until the next programmed time period begins. 5. To cancel the temporary setting at any time, press the "RUN" button. Note: Make sure the thermostat is set to the system you want to control (heat or cool). Please keep in mind that these instructions are specific to the Honeywell RTH2410B1019/E1 thermostat and may differ for other models.
The Honeywell RTH2410B1019/E1 thermostat may not be responding to temperature changes due to various reasons. Here are some troubleshooting steps to address this issue: 1. Check if the display is blank. Make sure the furnace door is closed securely and ensure that fresh AAA alkaline batteries are correctly installed. 2. If the heating or cooling system does not respond, set the system switch to "Heat" and make sure the temperature is set higher than the inside temperature. Alternatively, set the system switch to "Cool" and ensure the temperature is set lower than the inside temperature. Wait for 5 minutes for the system to respond. 3. If the temperature settings do not change, verify that the heating and cooling temperatures are set within acceptable ranges. For heat, set the temperature between 40°F to 90°F (4.5°C to 32°C). For cooling, set the temperature between 50°F to 99°F (10°C to 37°C). 4. If the "Cool On" or "Heat On" indicators are flashing, it indicates that the compressor protection feature is engaged. Wait for 5 minutes for the system to restart safely without damaging the compressor. 5. If the "Heat On" or "Cool On" indicators are not displayed, ensure that the system switch is set to the appropriate mode (Heat or Cool) and set the temperature level above or below the current room temperature accordingly. Please note that these troubleshooting steps are specific to the Honeywell RTH2410B1019/E1 thermostat and may vary for other models.
To program a schedule on the Honeywell RTH2410B1019/E1 thermostat, follow these steps: 1. Press the "SET" button to enter the programming mode. 2. Use the "s" or "t" button to select the desired day of the week (Monday to Sunday). 3. Press the "SET" button again to confirm the selected day. 4. Set the desired wake time by pressing the "s" or "t" button to adjust the hour and minute. 5. Press the "SET" button to confirm the wake time. 6. Set the desired temperature for the wake time by pressing the "s" or "t" button. 7. Press the "SET" button to confirm the temperature setting. 8. Repeat steps 4 to 7 to set the leave time, return time, and sleep time for each day of the week. 9. Once all the desired times and temperatures are set, press the "RUN" button to activate the programmed schedule. Note: The programmed schedule will automatically repeat every day unless modified. Please keep in mind that these instructions are specific to the Honeywell RTH2410B1019/E1 thermostat and may differ for other models.
If the Honeywell RTH2410B1019/E1 thermostat is not turning on the heating/cooling system, you can follow these troubleshooting steps: 1. Check if the thermostat is properly set to the desired mode (Heat or Cool). Ensure that the system switch is in the correct position. 2. Verify that the temperature setting is higher than the current room temperature for heating or lower for cooling. Adjust the temperature if necessary. 3. Ensure that the circuit breaker or fuse for the heating/cooling system is not tripped or blown. Check the electrical panel and reset the breaker or replace the fuse if needed. 4. Make sure the thermostat is receiving power. Check if the display is lit up and functioning. If not, check the batteries and replace them if necessary. 5. Check the wiring connections between the thermostat and the heating/cooling system. Ensure that all wires are securely connected and not damaged. 6. If the above steps do not resolve the issue, it is recommended to contact a qualified HVAC technician for further assistance. Please note that these troubleshooting steps are specific to the Honeywell RTH2410B1019/E1 thermostat and may vary for other models.
To reset the Honeywell RTH2410B1019/E1 thermostat to its default settings, follow these steps: 1. Press and hold the "SET" button for approximately 5 seconds until the screen changes. 2. Release the "SET" button and the thermostat will enter the setup mode. 3. Use the "s" or "t" button to navigate through the setup options. 4. Locate the "Reset" option and press the "SET" button to select it. 5. Confirm the reset by pressing the "SET" button again. 6. The thermostat will reset to its default settings, erasing any previously programmed schedules or customized settings. 7. After the reset, you will need to reconfigure the thermostat according to your preferences, including setting the time, date, and desired temperature settings. Please note that performing a reset will erase all previous settings and schedules, so it is important to reconfigure the thermostat after the reset to ensure proper functionality.
Yes, the manual of the Honeywell RTH2410B1019/E1 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 3I just moved into an apartment with this unit and I have no idea how to set the temperature to 77. Please advise
1 comment
To set the temperature to 77 degrees on the Honeywell RTH2410B1019/E1 thermostat, follow these steps: 1. Press the "Set" button on the thermostat. 2. Use the up or down arrow buttons to adjust the temperature to 77 degrees. 3. Once the desired temperature is displayed, press the "Set" button again to confirm the setting.
This answer is automatically generatedCan the thermostat be set to hold and maintain 1 temperature, without programming all the various time periods? How to do this?
Please help troubleshoot my Honeywell Thermostat RTH2410 B 1019. My AC stopped working & blinked "O2" and "21". I replaced old batteries with new AAA batteries. Now thermostat is completely blank and AC still won't turn on at all. Any help is very appreciated!