View the manual for the Honeywell RTH111B1024/E1 here, for free. This manual comes under the category thermostat and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Honeywell RTH111B1024/E1 or do you need help? Ask your question here
The Honeywell RTH111B1024/E1 is a thermostat designed to regulate the temperature in your home. With its user-friendly interface, this thermostat allows for easy programming and control of your heating and cooling system. This device is specifically designed to be compatible with most heating and cooling systems, providing versatility and convenience. Featuring a precise temperature control system, the Honeywell RTH111B1024/E1 helps ensure that your home maintains a comfortable temperature at all times. With its built-in thermometer, this thermostat accurately detects the current temperature, allowing it to efficiently adjust your HVAC system to your desired level. The Honeywell RTH111B1024/E1 also features a backlit display, enabling easy visibility and usability even in low-light conditions. This makes it convenient to adjust the temperature settings, even in the dark or from a distance. With its straightforward and intuitive programming options, this thermostat helps you create a personalized schedule that suits your lifestyle. Whether you prefer to keep your home cooler during the day or warmer at night, the Honeywell RTH111B1024/E1 allows for easy customization to meet your specific preferences. Overall, the Honeywell RTH111B1024/E1 provides a reliable and efficient way to control the temperature in your home. Designed for compatibility and ease of use, this thermostat ensures that you can enjoy a comfortable living environment while also maximizing energy efficiency.
| Brand | Honeywell |
| Model | RTH111B1024/E1 |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF), Installation Guide (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell RTH111B1024/E1 below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
The display of the Honeywell RTH111B1024/E1 thermostat may be blank due to a few possible reasons. Here are the steps to troubleshoot the issue: 1. Check the batteries: The thermostat is powered by two AAA batteries. If the batteries are low or depleted, the display may go blank. Replace the batteries with fresh ones. 2. Verify the battery installation: Ensure that the batteries are inserted correctly, with the positive (+) and negative (-) ends aligned properly. 3. Reset the thermostat: If the display remains blank after replacing the batteries, try resetting the thermostat. Remove it from the wallplate by pulling it from the bottom. Wait for a few seconds, then reinsert the thermostat onto the wallplate. 4. Check the system switch: Make sure the system switch is set to the appropriate mode (Heat or Cool) based on your heating or cooling system. If the switch is in the Off position, the display will be blank. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Honeywell customer support for further assistance. Please note that these troubleshooting steps are specific to the Honeywell RTH111B1024/E1 thermostat and may not apply to other models or brands.
The heating or cooling system may not be responding to the Honeywell RTH111B1024/E1 thermostat due to a few possible reasons. Here are the steps to troubleshoot the issue: 1. Check the system switch: Ensure that the system switch on the thermostat is set to the appropriate mode (Heat or Cool) based on your heating or cooling system. Make sure the temperature is set higher than the inside temperature for heating mode and lower for cooling mode. 2. Wait for the system to respond: After adjusting the settings, wait for about 5 minutes for the system to respond. Sometimes, there may be a delay in the system turning on or off. 3. Verify the setpoint range: Confirm that the setpoint temperature is within the allowed range. For heating, the range is 40°F to 90°F (4.5°C to 32°C), and for cooling, the range is 50°F to 99°F (10°C to 37°C). 4. Check for flashing indicators: If the "Cool On" or "Heat On" indicator is flashing, it means that the compressor protection feature is engaged. Wait for 5 minutes for the system to restart safely without damaging the compressor. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Honeywell customer support for further assistance. Please note that these troubleshooting steps are specific to the Honeywell RTH111B1024/E1 thermostat and may not apply to other models or brands.
To change the setpoint on the Honeywell RTH111B1024/E1 thermostat, follow these steps: 1. Press the up or down buttons on the thermostat until you reach the desired temperature. The setpoint temperature will be displayed on the screen. 2. Make sure the SYSTEM switch is set to the system you want to control (Heat or Cool). This ensures that the thermostat adjusts the temperature accordingly. 3. To view the setpoint temperature, press the Up or Down button once. The setpoint temperature will appear on the screen for five seconds. 4. If you want to change the temperature units from Fahrenheit to Celsius or vice versa, access the setup menu by pressing the s or t button. Select option 14 to choose Fahrenheit or Celsius temperature display. 5. The thermostat also has a compressor protection feature. If the "Cool On" or "Heat On" message is flashing on the screen, it means the compressor protection is engaged. During this time, the compressor waits for approximately 5 minutes before restarting to prevent equipment damage. Please note that these steps are specific to the Honeywell RTH111B1024/E1 thermostat and may not apply to other models or brands.
The "Cool On" or "Heat On" flashing on the Honeywell RTH111B1024/E1 thermostat indicates that the compressor protection feature is engaged. This feature helps prevent damage to the compressor in your air conditioning or heat pump system. The flashing message serves as a warning that the compressor needs to wait for 5 minutes before restarting to avoid potential damage. During the wait time, the display will continue to flash the "Cool On" or "Heat On" message. Once the safe wait time has elapsed, the flashing message will stop, and the compressor will turn on. It is important to note that this feature is a normal operation of the thermostat and is designed to protect the compressor. There is no action required from the user during this time. Simply wait for the flashing message to stop, and the system will resume normal operation. If you have any further concerns or questions about the flashing message, it is recommended to refer to the Honeywell customer support for additional assistance.
The electrical ratings for the terminals of the Honeywell RTH111B1024/E1 thermostat are as follows: - W Heating: Voltage: 20 VAC-30 VAC, Running Current: 1.0 A - W Power Pile Heating: Voltage: 750 mV DC, Running Current: 100 mA DC - Y Compressor: Voltage: 20 VAC-30 VAC, Running Current: 1.0 A - O Changeover, Cooling: Voltage: 20 VAC-30 VAC, Running Current: 0.5 A - B Changeover, Heating: Voltage: 20 VAC-30 VAC, Running Current: 0.5 A - G Fan: Voltage: 20 VAC-30 VAC, Running Current: 0.5 A These electrical ratings indicate the voltage and running current that can be safely handled by each terminal of the thermostat. It is important to ensure that the electrical connections are made according to these ratings to prevent any damage to the thermostat or the connected heating or cooling system. Please note that these electrical ratings are specific to the Honeywell RTH111B1024/E1 thermostat and may not apply to other models or brands.
Yes, the manual of the Honeywell RTH111B1024/E1 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 7When i open my digital home thermostat i see oil on the spikes, is this normal
How to program this unit for use on a pellet stove
How to set the thermostat on my honeywell
I need to reprogram the thermostat. It’s locked at 21
How do I go from Celsius to Fahrenheit
Heat shuts down. Themo displaying LO
My screen is blank. Model number th111b1024