Honeywell FocusPRO TH6320U manual

Honeywell FocusPRO TH6320U
6.2 · 1
PDF manual
 · 24 pages
English
manualHoneywell FocusPRO TH6320U

FocusPRO

®

6000 Series

Programmable
Digital
Thermostat
User Guide
Read and save these instructions.
For help please visit yourhome.honeywell.com
Function buttons
Press to select the
function displayed just
above each button.
(Functions change
depending on the task.)
Temperature buttons
Press to set preferred temperature.
Battery holder
Thermostat controls
Digital display
Hold Button
Press to override programmed
temperature control
Reference card

View the manual for the Honeywell FocusPRO TH6320U here, for free. This manual comes under the category thermostat and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Honeywell FocusPRO TH6320U or do you need help? Ask your question here

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave Mcginley November 7, 2023

How to have heat go on at 66 and off at 68

The Honeywell FocusPRO TH6320U is a programmable thermostat designed for residential and commercial heating, ventilation, and air conditioning (HVAC) applications. It features a backlit display and touch-button interface that makes it easy to program and operate. The thermostat offers seven-day programming and can be configured to meet specific user needs and preferences. It also has a digital display that shows temperature and humidity levels, as well as system and fan status. The FocusPRO TH6320U has a range of features that improve energy efficiency and comfort. It has a built-in compressor protection feature that helps to extend the life of the HVAC system, and it can be set up to control up to three heating and two cooling stages. It also has a filter change reminder that alerts users when it is time to replace the air filter. The thermostat is compatible with wireless accessories, such as temperature sensors and remote controls, and it can be integrated with home automation systems that support the Z-Wave protocol. The FocusPRO TH6320U is built to last, with a durable construction and a five-year warranty. Overall, the Honeywell FocusPRO TH6320U is a reliable and versatile programmable thermostat suitable for a wide range of HVAC applications.

General
BrandHoneywell
ModelFocusPRO TH6320U
Productthermostats
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell FocusPRO TH6320U below.

Where is the best location to place the thermostat?

The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.

What is the dead band of a thermostat?

If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

How do I change the function displayed above the function buttons on the Honeywell FocusPRO TH6320U thermostat?

To change the function displayed above the function buttons on the Honeywell FocusPRO TH6320U thermostat, follow these steps: 1. Locate the function buttons on the thermostat. These buttons are labeled and are usually located below the digital display. 2. Press the function button that corresponds to the desired function you want to change. The functions displayed above each button may vary depending on the task. 3. Continue pressing the function button until you reach the desired function. Each press will cycle through the available functions. 4. Once you have selected the desired function, release the function button. The selected function will now be displayed above the function buttons. By following these steps, you can easily change the function displayed above the function buttons on the Honeywell FocusPRO TH6320U thermostat.

Why is the temperature not changing when I press the temperature buttons on the Honeywell FocusPRO TH6320U thermostat?

If the temperature is not changing when you press the temperature buttons on the Honeywell FocusPRO TH6320U thermostat, you can try the following troubleshooting steps: 1. Make sure the thermostat is set to the correct system (heat, cool, or auto). Press the SYSTEM button to cycle through the available options. 2. Check if the temperature you have set is higher than the current indoor temperature for heating or lower for cooling. Adjust the temperature accordingly. 3. Verify that the circuit breaker for the heating and cooling system is not tripped. If it is, reset the circuit breaker. 4. Ensure that the power switch at the heating and cooling system is turned on. 5. Make sure the furnace door is securely closed. 6. Wait for at least 5 minutes to allow the system to respond. 7. If none of the above steps resolve the issue, consider restoring the thermostat to its default settings. Press the SET CLOCK/DAY/SCHEDULE button, followed by the SET SCHEDULE button. Then, press the DONE and NEXT buttons simultaneously for 4 seconds. By following these steps, you can troubleshoot the issue of the temperature not changing on the Honeywell FocusPRO TH6320U thermostat.

Where is the battery holder located on the Honeywell FocusPRO TH6320U thermostat?

The battery holder on the Honeywell FocusPRO TH6320U thermostat is located on the back of the thermostat. To access the battery holder, follow these steps: 1. Gently remove the thermostat from its wall-mounted base by pulling it straight out. 2. Turn the thermostat over to expose the backside. 3. Look for a small compartment on the back of the thermostat. 4. Slide the battery compartment cover in the direction indicated by the arrow or press the latch to open the compartment. 5. Insert the required batteries into the battery holder, ensuring the correct polarity (+/-) is observed. 6. Close the battery compartment cover by sliding it back into place or pressing the latch until it clicks. 7. Reattach the thermostat to the wall-mounted base by aligning the pins on the back of the thermostat with the corresponding slots on the base and pushing it in until it snaps into place. By following these steps, you can easily locate and access the battery holder on the Honeywell FocusPRO TH6320U thermostat.

Why is the hold button not overriding the programmed temperature control on the Honeywell FocusPRO TH6320U thermostat?

The hold button on the Honeywell FocusPRO TH6320U thermostat may not be overriding the programmed temperature control due to the following reasons: 1. Incorrect system setting: Ensure that the thermostat is set to the correct system (heat, cool, or auto). Press the SYSTEM button to cycle through the available options and select the desired system. 2. Incorrect programming: Check the programmed schedule to see if there are any temperature settings that conflict with the desired hold temperature. Adjust the programmed schedule if necessary. 3. Temporary override: If the hold button is not maintaining the desired temperature, try using the temporary override feature. Press the HOLD button and then use the temperature buttons to set the desired temperature. Keep in mind that the temporary override will only maintain the new temperature until the next programmed time period begins. 4. System malfunction: If none of the above steps resolve the issue, there may be a malfunction with the thermostat or the heating/cooling system. Consider contacting a professional technician to inspect and troubleshoot the system. By checking the system setting, reviewing the programming, utilizing the temporary override, and addressing any potential malfunctions, you can troubleshoot the issue of the hold button not overriding the programmed temperature control on the Honeywell FocusPRO TH6320U thermostat.

Can you provide an overview of the thermostat controls on the Honeywell FocusPRO TH6320U thermostat?

The Honeywell FocusPRO TH6320U thermostat has several controls that allow you to adjust and customize its settings. Here is an overview of the thermostat controls: 1. Display: The digital display shows the current temperature, system status, and other relevant information. 2. Temperature buttons: Use the up and down temperature buttons to adjust the desired temperature for heating or cooling. 3. Function buttons: The function buttons allow you to select different functions displayed above each button, such as fan control, system mode, and programming options. 4. System button: Press the system button to cycle through the available system modes, including heat, cool, and auto. 5. Hold button: The hold button allows you to override the programmed temperature control and set a temporary hold temperature. 6. Set schedule button: Use the set schedule button to access the programming options and set a customized schedule for your thermostat. 7. Menu button: Press the menu button to access additional settings and options, such as screen brightness, language selection, and filter change reminders. By familiarizing yourself with these thermostat controls, you can easily adjust the temperature, select system modes, customize the schedule, and access other settings on the Honeywell FocusPRO TH6320U thermostat.

Is the manual of the Honeywell FocusPRO TH6320U available in English?

Yes, the manual of the Honeywell FocusPRO TH6320U is available in English .

Is your question not listed? Ask your question here

No results