Honeywell FocusPRO TH6320 manual

Honeywell FocusPRO TH6320
5.9 · 1
PDF manual
 · 24 pages
English
manualHoneywell FocusPRO TH6320

FocusPRO

®

6000 Series

Installation
Instructions
Programmable
Digital
Thermostat
M29433
Wallplate installation
Remove the wallplate from the thermostat,
then follow directions below for mounting.
1. Remove battery holder.
2. Pull here to remove wallplate from new
thermostat.
3. Pull wires through wire hole.
4. Position wallplate on wall, level and mark
hole positions with pencil.
5. Drill holes at marked positions as shown
below, then tap in supplied wall anchors.
6. Place wallplate over anchors, insert and
tighten mounting screws.
7. Insert reference card.
M29369
Drill 7/32"
holes for
plaster.
Drill 3/16"
holes for
drywall.
Wire hole
Mounting
screws
MCR29434

View the manual for the Honeywell FocusPRO TH6320 here, for free. This manual comes under the category thermostat and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Honeywell FocusPRO TH6320 or do you need help? Ask your question here

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
J
JoanneSeptember 1, 2023

how do I get the thermostat to wi fi set up? Since i changed internet provider last September I can't connect with my phone.

L
Linda BachSeptember 5, 2023

I have a Honeywell TH6320R thermostat that will no longer turn on air conditioner and will not hold a setting when in cool mode. The thermostat says "no signal" which it never said before. I do not have it hooked up to my wifi. I have changed the batteries and checked the circuit breaker. I cannot get it to hold the setting in order to trigger the air conditioner to turn on. Has worked properly until today.

The Honeywell FocusPRO TH6320 is a thermostat designed for residential heating and cooling systems. This thermostat offers a range of features to help control the temperature in your home efficiently. The FocusPRO TH6320 has a backlit display that makes it easy to read and program in any lighting condition. The thermostat is equipped with a large, easy-to-use touchscreen that allows for intuitive navigation through the menu options. It also has a built-in temperature sensor that accurately measures the ambient temperature in the room. With the FocusPRO TH6320, you have the ability to program separate settings for weekdays and weekends, allowing for energy-saving adjustments when you are not at home. The thermostat also offers a vacation mode that allows you to set a specific temperature while you are away. In terms of compatibility, the FocusPRO TH6320 is compatible with a wide range of heating, cooling, and heat pump systems. It supports 2-stage heating and cooling systems, as well as multi-stage heat pumps. Installation of the FocusPRO TH6320 is straightforward, and it can be mounted on the wall or placed on a tabletop using the provided stand. It is powered by batteries, which means it does not require a separate power source or wiring. Overall, the Honeywell FocusPRO TH6320 is a reliable and user-friendly thermostat that offers customizable programming options and compatibility with various heating and cooling systems.

General
BrandHoneywell
ModelFocusPRO TH6320
Productthermostats
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell FocusPRO TH6320 below.

Where is the best location to place the thermostat?

The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.

What is the dead band of a thermostat?

If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

How do I change the temperature setting on my Honeywell FocusPRO TH6320 thermostat?

Press the "Up" or "Down" arrow buttons on the thermostat until you reach your desired temperature.

How can I program different temperature schedules for weekdays and weekends?

To set different schedules, press the "Menu" button, select "Program Schedule," then choose "Weekday" or "Weekend" to customize the temperature settings for each day.

My thermostat is displaying "Low Battery." How do I replace the batteries?

To replace the batteries, gently slide the front cover of the thermostat upwards to reveal the battery compartment. Insert two new AA batteries, ensuring proper polarity, and slide the cover back into place.

Can I adjust the temperature scale from Fahrenheit to Celsius on the thermostat?

Yes, you can. Press the "Menu" button, select "System," then choose "Temperature Display" to switch between Fahrenheit and Celsius scales.

The thermostat screen is blank. How can I reset it?

First, check if the furnace power switch is in the "On" position. If it is, you may need to reset the thermostat. Locate the circuit breaker that controls power to the furnace, turn it off, wait for a few seconds, and then turn it back on. This should reset the thermostat and restore its display.

Is the manual of the Honeywell FocusPRO TH6320 available in English?

Yes, the manual of the Honeywell FocusPRO TH6320 is available in English .

Is your question not listed? Ask your question here

No results