View the manual for the Honeywell CT3200 here, for free. This manual comes under the category thermostat and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Honeywell CT3200 or do you need help? Ask your question here
The Honeywell CT3200 thermostat is a device designed for controlling and regulating the temperature in a home or building. It offers precise temperature control and a variety of programmable settings to suit individual needs. This thermostat is compatible with many heating and cooling systems, including forced air, heat pump, and electric systems. It has an easy-to-read digital display that shows the current temperature and allows users to adjust settings with ease. The display also includes a backlight for visibility in low light conditions. One of the key features of the Honeywell CT3200 is its programmability. Users can program different temperature settings for different times of the day, allowing for energy savings and optimal comfort. The thermostat also has a temporary override feature, which allows for a temporary change in temperature without altering the programmed settings. Installation of the Honeywell CT3200 is relatively simple, as it can be wall-mounted and wired to the existing heating and cooling system. It operates on battery power, helping to maintain settings during power outages. Overall, the Honeywell CT3200 thermostat provides reliable and accurate temperature control for homes and buildings. Its programmable features offer flexibility and energy efficiency, making it a practical choice for those seeking to regulate and customize their indoor climate.
| Brand | Honeywell |
| Model | CT3200 |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell CT3200 below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
To verify if the Honeywell CT3200 thermostat is compatible with your heating/cooling system, follow these steps: 1. Determine your heating/cooling system type: Identify if you have a conventional single-stage system, electric baseboard heating, steam system, heat pump, multistage heat pump, or multistage conventional system. 2. Refer to the compatibility chart: In the CT3200 thermostat manual, there is a compatibility chart that lists different heating/cooling system types and indicates whether they are compatible with the CT3200 thermostat. 3. Find your system type in the chart: Locate your heating/cooling system type in the compatibility chart and check if it is marked as compatible with the CT3200 thermostat. 4. Check for alternate models: If your system is not compatible with the CT3200 thermostat, the compatibility chart may recommend an alternate Honeywell model that is suitable for your system. 5. Seek assistance if unsure: If you are unsure about the compatibility or need further guidance, you can visit the Honeywell website at www.honeywell.com/yourhome or contact Honeywell Customer Relations at 1-800-468-1502 for assistance. Remember to consult the CT3200 thermostat manual for specific details and instructions regarding compatibility verification.
If the CT3200 thermostat is not compatible with your heating/cooling system, you can take the following steps: 1. Verify compatibility: Double-check the compatibility chart in the CT3200 thermostat manual to ensure that you have correctly identified your heating/cooling system type and that it is indeed incompatible with the CT3200 thermostat. 2. Consider alternate models: Refer to the compatibility chart for recommended alternate Honeywell thermostat models that are compatible with your specific heating/cooling system. Look for models that offer similar features and functionality to the CT3200 thermostat. 3. Research compatibility options: Conduct research online or contact Honeywell Customer Relations to explore other Honeywell thermostat models that may be compatible with your heating/cooling system. Provide them with details about your system type and any specific requirements you may have. 4. Consult a professional: If you are unsure about selecting a compatible thermostat or need assistance with installation, it is recommended to consult a professional HVAC technician. They can assess your system and recommend a suitable thermostat that meets your needs. Remember, it is important to ensure compatibility between your thermostat and heating/cooling system to ensure proper functionality and performance.
To program the weekday/weekend schedules on the Honeywell CT3200 thermostat, follow these steps: 1. Heating Schedule: a. Write down the desired times and temperatures for the heating schedule. b. Set the System switch to HEAT. c. Press the button once to display a blank schedule. d. Use the up or down buttons to set the Monday-Friday WAKE time. e. Use the up or down buttons to set the Monday-Friday WAKE temperature. f. Press the button to display a blank schedule for the next program period. g. Repeat steps d-f for each weekday program period. 2. Cooling Schedule: a. Write down the desired times and temperatures for the cooling schedule. b. Press the button until the weekend schedule is displayed. c. Use the up or down buttons to set the Saturday and Sunday WAKE time. d. Use the up or down buttons to set the Saturday and Sunday WAKE temperature. e. Press the button again to display a blank schedule for the SLEEP program period. f. Repeat steps c-e to set the program for the SLEEP period. g. Press the button to start the program. Please note that these steps are a general guide and may vary slightly depending on the specific model of the CT3200 thermostat. For more detailed instructions, refer to the CT3200 thermostat manual.
To change the clock for Daylight/Standard Time on the Honeywell CT3200 thermostat, follow these steps: 1. Press the button once. The current time is displayed. 2. Press and hold the up or down button until the correct time is displayed. 3. Press the button once. The current time, day, and temperature are displayed. Please note that the specific steps may vary slightly depending on the model of the CT3200 thermostat. It is important to refer to the thermostat's manual for detailed instructions and illustrations. Additionally, it is worth mentioning that the CT3200 thermostat allows you to program schedules for both the heating and cooling seasons. You can set up to four program periods for weekdays and up to two program periods for weekends. For more information on programming features, refer to the thermostat's manual. Please consult the CT3200 thermostat manual for further guidance and specific details on changing the clock and programming schedules.
To override the program settings on the Honeywell CT3200 thermostat, follow these steps: 1. Temporary temperature change: a. Ensure that the System switch is set to either HEAT or COOL. b. Press the up or down button until the desired temperature is displayed. c. An arrow will be displayed, indicating that the change is temporary. d. Note that the temporary change will only last for the current program period. The programmed schedule will resume at the next scheduled program period. To cancel the temporary change before the next scheduled program period, press the cancel button. 2. Hold temperature indefinitely: a. Press the hold button. b. "HLd" will be displayed. c. Press the up or down button until the desired temperature is displayed. d. The hold feature allows you to maintain a constant temperature indefinitely. To cancel the hold, press the cancel button. Please note that these steps are a general guide and may vary slightly depending on the specific model of the CT3200 thermostat. For more detailed instructions, refer to the thermostat's manual.
To operate the fan and system switches on the Honeywell CT3200 thermostat, follow these steps: 1. Fan switch: a. Locate the Fan switch on the thermostat. b. The Fan switch has three positions: ON, AUTO, and OFF. c. Set the Fan switch to ON to keep the fan running continuously. d. Set the Fan switch to AUTO to allow the fan to operate only when heating or cooling is required. e. Set the Fan switch to OFF to turn off the fan completely. 2. System switch: a. Locate the System switch on the thermostat. b. The System switch has two positions: HEAT and COOL. c. Set the System switch to HEAT to activate the heating system. d. Set the System switch to COOL to activate the cooling system. e. Set the System switch to OFF to turn off both the heating and cooling systems. Please note that the specific positions and functions of the switches may vary slightly depending on the model of the CT3200 thermostat. It is important to refer to the thermostat's manual for detailed instructions and illustrations. Remember to select the appropriate settings based on your comfort needs and the current weather conditions.
To replace the batteries in the Honeywell CT3200 thermostat, follow these steps: 1. Make sure that the System switch is set to the OFF position. 2. Open the battery door using a coin or by following the instructions provided in the manual. 3. Remove the old batteries by pressing on the left side of the batteries and pulling them out. 4. Install the new batteries, ensuring that the positive and negative terminals are oriented correctly as marked inside the battery case. 5. Close the battery door securely. 6. Set the System switch to either HEAT or COOL. 7. If the display is blank after replacing the batteries, it indicates that the batteries were dead or incorrectly installed. In this case, set the System switch to OFF, insert the batteries backwards, wait for five to ten seconds, and then return the batteries to their correct orientation. 8. Begin reprogramming the thermostat if necessary, following the instructions provided in the manual. It is recommended to replace the batteries once a year to prevent the heating/cooling system from shutting down due to lack of battery power.
Here are some common troubleshooting tips for the Honeywell CT3200 thermostat: 1. Display or temperature issues: - Make sure the batteries are fresh and installed correctly. - If the display is blank, check and replace the batteries if necessary. - If the temperature display is limited to a specific range (e.g., 45°F-88°F), it is within the thermostat's temperature limit. 2. Cooling or heating issues: - Check that the System switch is set to the appropriate mode (COOL for cooling, HEAT for heating). - Verify that the system fuse or circuit breaker is not tripped and reset or replace if necessary. - Ensure correct wiring and good connections. - If the temperature setting is higher or lower than the current room temperature and the SYSTEM ON arrow is displayed, the thermostat is operating correctly. Contact a heating or cooling contractor for further assistance. 3. Battery-related issues: - If the display shows "bAt Lo" or the batteries are low, replace them as soon as possible. - If "bAt Lo" continues to display after replacing the batteries, set the System switch to OFF, insert the batteries backwards for five to ten seconds, and then replace them correctly. These troubleshooting tips should help resolve common issues with the CT3200 thermostat. If further assistance is needed, contact Honeywell Customer Relations or visit their website for support.
Yes, the manual of the Honeywell CT3200 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 2Is there an easy way to erase the current program on the thermostat?
is there a lockout feature on this model?