View the manual for the Honeywell CM907 here, for free. This manual comes under the category thermostat and has been rated by 50 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Honeywell CM907 or do you need help? Ask your question here
The Honeywell CM907 thermostat is a programmable thermostat that is designed to provide precise control over the temperature in residential and commercial buildings. It is specifically designed for the United States market and is available in the en_US language. One of the key features of the CM907 thermostat is its programmability, which allows users to set different temperature levels throughout the day to maximize comfort and energy savings. The thermostat has a 7-day programming option, allowing users to set different temperature schedules for each day of the week. The CM907 thermostat also has a user-friendly interface, with a large display that shows the current temperature and other relevant information. It has intuitive controls that make it easy to adjust the temperature and settings. In terms of installation, the CM907 thermostat is designed to be compatible with a wide range of heating and cooling systems, including gas, oil, and electric systems. It can be easily installed by following the included instructions. The CM907 thermostat also offers various advanced features, such as holiday mode, which allows users to set a lower temperature when they are away for an extended period. It also has frost protection, which prevents pipes from freezing by activating the heating system if the temperature drops too low. Overall, the Honeywell CM907 thermostat is a reliable and efficient option for those looking to have precise control over their heating and cooling systems. Its programmability, user-friendly interface, and compatibility with different systems make it a popular choice among homeowners and businesses alike.
| Brand | Honeywell |
| Model | CM907 | CM907 |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell CM907 below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
Make sure the thermostat is properly connected to its power source, usually through batteries or the electrical system. Check for any loose connections or dead batteries, as this can cause the display to not function.
Press the up or down arrow buttons on the thermostat to increase or decrease the desired temperature. The display will show the current temperature and the target temperature you are setting.
Ensure that the thermostat is set to the appropriate mode, either heating (H) or cooling (C), and that the desired temperature is set above or below the current room temperature, depending on your needs. Also, verify that the circuit breaker for the HVAC system is not tripped.
Press the "Schedule" button on the thermostat, and then use the arrow buttons to select the desired day of the week. From there, you can set different time periods and temperatures for the scheduled heating or cooling periods.
Check that the "Schedule" mode is enabled on the thermostat, indicated by a clock icon. Make sure the programmed schedule is correctly set with the desired temperatures and time periods. Also, ensure that any temporary overrides or hold options are not active, as they may override the programmed schedule.
Yes, the manual of the Honeywell CM907 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 13Get the impression that it switched to automatic while I want to operate it manually. How can I change that?
This message has been automatically translatedHow can I set the heating between 11:00 AM and 10:00 PM at 21 degrees and between 10:00 PM and 11:00 AM at 18 degrees, and then have the Monday schedule set to 18 degrees all day?
This message has been automatically translatedWhen I select the current day, I then press the green ok button and it does not stay fixed.
This message has been automatically translatedGood day, I have a problem with the thermostat, it doesn't turn on, the batteries are working correctly, I don't know what could be the issue?
Hello. After replacing the batteries with new ones, the entire display and all icons are illuminated. I have tried multiple types of batteries, but it remains the same. When I put back the old drained batteries, it works normally, but it no longer turns on the pump contact. It also indicates that the batteries are okay.
Hello, the receiver of the programmer has a permanent red light on and it doesn't let me turn on the heating, could you tell me what I have to do?
I want to turn off the device so that I don't have heating, and I don't know how to turn it off so that heating is not on in the summer.
My thermostat device suffered a corrosion in the battery area. Is there a way to rescue this piece?
1 comment
To rescue a thermostat suffering from corrosion in the battery area, follow these steps: 1. Lift up the front cover of the thermostat to reveal the battery cover and product controls. 2. Remove the battery cover by pressing down and sliding out. 3. Insert the 2 x AA LR6 Alkaline Batteries supplied with the thermostat, ensuring the correct orientation. 4. After a short pause, the thermostat will display information on the screen and is now ready for use. 5. Replace the battery cover by sliding it firmly back into the front of the thermostat. If the above steps do not resolve the issue, consider replacing the batteries with new ones.
This answer is automatically generatedThe numbers and writings are fragmented. The batteries are new. What should I do? Thank you.
This message has been automatically translated"I have it programmed for 21 degrees and even though the ambient temperature is also 21, the boiler jumps every 5 minutes for about two minutes and turns off, and so it goes all day even though I don't see any variation in the temperature, is this normal? The same thing happens with the factory programming."
This message has been automatically translated