View the manual for the Honeywell CM707 here, for free. This manual comes under the category thermostat and has been rated by 9 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Honeywell CM707 or do you need help? Ask your question here
The Honeywell CM707 is a programmable thermostat that allows users to easily control the heating and cooling of their homes. It features a sleek and modern design that blends well with any decor. The thermostat is specifically designed to provide comfort and energy efficiency, allowing users to set different temperatures for different times of the day. The Honeywell CM707 offers a user-friendly interface with simple and intuitive buttons for easy programming and navigation. It features a large LCD screen that displays the current temperature, set temperature, and program schedules. This thermostat also has a backlight, making it easy to read in low light conditions. One of the key features of the Honeywell CM707 is its advanced scheduling capabilities. Users can set up to six different temperature settings per day, ensuring optimal comfort and energy savings. This thermostat also has a vacation mode, which allows users to set an energy-saving temperature while they are away. In terms of compatibility, the Honeywell CM707 is compatible with most heating and cooling systems, including gas, oil, and electric systems. It also supports both 24-volt and millivolt systems. Overall, the Honeywell CM707 is a reliable and user-friendly thermostat that provides precise temperature control and energy savings. It is designed to withstand the test of time and ensure optimal comfort in any home.
| Brand | Honeywell |
| Model | CM707 |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell CM707 below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
A possible reason could be that the batteries in your thermostat have run out and need to be replaced. Check and replace the batteries if necessary.
To adjust the temperature setting, locate the up and down arrow buttons on your thermostat. Press the up arrow to increase the temperature and the down arrow to decrease it.
This could indicate that your thermostat is currently in a mode where the heating system is disabled. Check the mode settings on your thermostat and ensure it is set to a heating mode for the desired temperature adjustment.
On your thermostat, locate the button or menu option that allows you to access the scheduling feature. Follow the instructions to set specific time intervals and temperature preferences for different parts of the day.
An error code indicates that there might be an issue with your thermostat or heating system. It is recommended to consult the troubleshooting section of the manual to identify the specific error code and follow the suggested actions to resolve the problem.
Yes, the manual of the Honeywell CM707 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Honeywell and is the answer not in the manual?
Question and answer
Number of questions: 7I lost my controller, however all the cables and that white box are still connected to the boiler on the wall, can I just buy a new control panel Honeywell CM707, will that work or do I need to pair them or something?
Hi have Honeywell cm707 one upstairs and one downstairs The one downstairs heats only downstairs and the one up controls upstairs so I have to go up and down stairs to turn of and on is there a way we’re the downstairs one turns both upstairs and downstairs thank you
My thermostats are set on auto but they appear to be coming on outside if these times
The binding code doesn't show when I press the required 3 button
How to program optimum start on cm707
Yes
My CM707 stays on manual but says auto