Hoffman A42SA3812LPPL manual

Hoffman A42SA3812LPPL
9.7 · 1
PDF manual
 · 20 pages
English
manualHoffman A42SA3812LPPL
© 2018 Hoffman Enclosures Inc. PH 763 422 2211 • nVent.com/HOFFMAN 87569072- 2 -

WARNING

The functions, ts, and clearances of the installation described hereon are calculated from information supplied by the
manufactures of the equipment to be installed. Be certain to check the function, ts, and clearances of all equipment both before
and after installation to assure that it operates properly and safely and meets all applicable codes, standards, and regulations.
In the event the completed installation does not function properly or fails to meet any such codes, standards, or regulations,
do not attempt to make alterations or operate the equipment. Report such facts immediately to:
Hoffman Customer Service
2100 Hoffman Way
Anoka, MN 55303
763 422 2211
http://hoffman.nvent.com/contact-us

NOTICE

To maintain the environmental rating of this enclosure: install in any opening, only listed or recognized disconnect devices,
external mounting feet, or conduit hubs that have the same environmental rating as the enclosure. Install in compliance with the
installation instructions of the device.
Installation Instruction Index
Brand of Disconnect Type See Pages
Allen−Bradley 1494V Variable Depth 4,5
Cutler−Hammer C361/C371 Variable Depth 6,7
General Electric STDA Variable Depth 8,9
Square D 9422 Variable Depth 10,11
Cutler−Hammer C371 Flex Shaft
TM
Flexible Cable 12,13
General Electric SCH Flexible Cable 14,15
Siemens I−T−E Max Flex
TM
Flexible Cable 16,17
Square D 9422 Flexible Cable 18,19

INSTALLATION STEPS

Step 1 − Drill mounting holes in panel for specic disconnect device being installed. See installation instruction index above
for appropriate panel drilling instructions. Additional holes may be required when using fused switches. See disconnect
manufacturers instructions.
Step 2 − Install operating handle on enclosure ange in holes provided. Follow disconnect manufacturers instructions.
Step 3 − Install disconnect device on panel. Follow disconnect manufacturers instructions for installation and adjustment.
Step 4 − Install door hardware on enclosure door. See table 3 on page 3 for selection of appropriate 2−point or 3−point door
hardware. Follow disconnect manufactures instructions and Hoffman additional information to install door hardware. See
disconnect manufactures instructions to adjust door hardware to properly interlock to disconnect operating handle.

Manual

View the manual for the Hoffman A42SA3812LPPL here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Hoffman A42SA3812LPPL or do you need help? Ask your question here

Need help?

Do you have a question about the Hoffman and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hoffman A42SA3812LPPL specifications

Below you will find the product specifications and the manual specifications of the Hoffman A42SA3812LPPL.

General
BrandHoffman
ModelA42SA3812LPPL | A42SA3812LPPL
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Height1067 mm
Width949 mm
Depth305 mm
Features
Product colorGray
MaterialSteel
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoffman A42SA3812LPPL below.

What is the height of the Hoffman A42SA3812LPPL?

The Hoffman A42SA3812LPPL has a height of 1067 mm.

What is the width of the Hoffman A42SA3812LPPL?

The Hoffman A42SA3812LPPL has a width of 949 mm.

What is the depth of the Hoffman A42SA3812LPPL?

The Hoffman A42SA3812LPPL has a depth of 305 mm.

Is the manual of the Hoffman A42SA3812LPPL available in English?

Yes, the manual of the Hoffman A42SA3812LPPL is available in English .

Is your question not listed? Ask your question here

No results