6.Reinstall the primary drain cover to the drain hole.
5.Reinstall the drain plug to the primary drain hole.
4.Drain water completely through. the drain hole
2.Move the air conditioner to a drain location or outside.
1.Unplug the air conditioner or disconnect power.
16
PORTABLEAIRCONDITIONER CARE
DrainingtheAirConditioner
NOTE: To avoid spilling water from the internal bucket, move the
air conditioner slowly and keep it level.
A.Secondary drain plug
B.Secondary drain cover
C.Primary drain plug
WARNING
ExcessiveWeightHazard
Use
twoormorepeopletomoveandinstallair
conditioner.
Failuretodosocanresultinbackorotherinjury.
A
B
C
D
NOTE: If the air conditioner will be stored after use, see
“Storing After Use”.
D.Primary drain cover
CleaningtheAirFilter
A. doorEvaporator air intake fliter panel
B. doorCondenser air intake fliter panel
A
B
1.Press ON/OFF to turn off the air conditioner.
2.Open the filter panel door on the back of the air conditioner
and remove.
3.Remove the air filter from the filter panel door.
4.Use a vacuum cleaner to clean the filter. If the filter is very
dirty, wash the filter in warm water with a mild detergent.
NOTE: Do not wash the filter in the dishwasher or use any
chemical cleaners.
4.Remove the tapping screw from the condenser air intake filter
panel door and remove.
5.Remove the air filter from the filter panel door.
CleaningtheOutside
1.Press ON/OFF to turn off the air conditioner.
2.Unplug the air conditioner or disconnect power.
3.Remove the air filter and clean separately. See "cleaning the
Air Filter ”.
4.Wipe the outside of the air conditioner with a soft, damp
cloth.
5.Plug in the air conditioner or reconnect power.
6.Press ON/OFF to start the air conditioner.
StoringAfterUse
1.Drain the water completely. See "draining the Air
Conditioner “.
2.Run the air conditioner set to Fan Only for approximately
12 hours to dry the air conditioner.
3.Unplug the air conditioner.
4.Remove the flexible exhaust hose and store with the air
conditioner in a clean, dry area. See “ installation
Instructions “.
5.Remove the window kit and store with the air conditioner in a
clean, dry area. See " Installation Instructions “.
6.Remove the filter and clean. See Cleaning the Air Filter.
7.Clean the outside of the air conditioner. See " Cleaning the
Outside “.
8.Reinstall the filter.
9.Remove the batteries and store the remote control with the
air conditioner in a clean, dry area.
5.Air dry the filter completely before replacing to ensure
maximum efficiency.
6.Reattach the air filter to the filter panel door.
7.Reinstall the filter panel door and tapping screw.
8.Press ON/OFF to start the air conditioner.
Manual
View the manual for the Hisense AP-14DR1SFJS2 here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Hisense AP-14DR1SFJS2 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hisense AP-14DR1SFJS2 below.
What does BTU stand for?
BTU stands for British Thermal Unit and is a unit used to indicate cooling power.
What does R-410A stand for?
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
How often should I clean the filters of my Hisense air conditioner?
The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Hisense air conditioner at least four times a year.
Is the manual of the Hisense AP-14DR1SFJS2 available in English?
Yes, the manual of the Hisense AP-14DR1SFJS2 is available in English .
Need help?
Do you have a question about the Hisense and is the answer not in the manual?
Question and answer
Number of questions: 0