3.When the desired time is displayed on the LCD, press the
TIMER ON button to confirm it.
A “Beep” will be heard,
and “ON” stops flashing.
TIMER ON/OFF
It is convenient to set the timer with TIMER ON/OFF buttons.The TIMER ON button can be used to turn on the unit automatically at the time you set.
Using the TIMER
1. Press TIMER ON, Then "On 12:00" flashes on the LCD.
2.Press the UP or DOWN button to get your desired time of day
to turn on the appliance.
Press the UP or DOWN button once to increase or
decrease the time setting by 1minute.
Press and hold the UP or DOWN button for 2seconds to
increase or decrease the time setting by 10 minutes.
Press and hold the UP or DOWN button for a longer time
to increase or decrease the time setting by 1 hour.
■
■
■
TIMER ON
Increase
Decrease
ON
The CLOCK must be set before using the TIMER function.
NOTE:
NormalSounds
When your air conditioner is operating normally, you may hear sounds such as:
■Air movement from the fan.
■Clicks from the thermostat cycling.
■Vibrations or noise due to poor wall or window construction.
■A high-pitched hum or pulsating noise caused by the
high-efficiency compressor cycling on and off.
4.After your desired time is displayed for 5 seconds, the clock
will display on the remote control display instead of the
desired time.
SWING
Press SWING once to change vertical airflow direction. Press again to hold the airflow louver at desired direction.NOTE: Airflow is automatically adjusted to a certain angle in accordance
■
■
with the operation mode after turning on the unit.The direction of airflow can be also adjusted to your ownrequirement by pressing the SWING button.
■
Do not turn the vertical adjustment louvers manually, toprevent damage. Turn off the unit first and cut off thepower supply, then restore power again to reset the louver.
SWING
TocancelTimerOn
Press TIMER ON button again, when a "beep" can be heard and the
indicator disappears, the TIMER ON mode has been canceled.
It is similar to set TIMER OFF, you can make
the appliance unit switch off automatically at the
time you set.
TIMER OFF
NOTE:
3. Press CLOCK button again once the real time is set.2. Use the Up and Down buttons to set the correct time.
Clock function
1. You can set oradjusttherealtimebypressingCLOCK button.
CLOCK
Manual
View the manual for the Hisense AP-14DR1SFJS2 here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Hisense AP-14DR1SFJS2 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hisense AP-14DR1SFJS2 below.
What does BTU stand for?
BTU stands for British Thermal Unit and is a unit used to indicate cooling power.
What does R-410A stand for?
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
How often should I clean the filters of my Hisense air conditioner?
The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Hisense air conditioner at least four times a year.
Is the manual of the Hisense AP-14DR1SFJS2 available in English?
Yes, the manual of the Hisense AP-14DR1SFJS2 is available in English .
Need help?
Do you have a question about the Hisense and is the answer not in the manual?
Question and answer
Number of questions: 0