■Press the UP button to raise the temperature. Press
the UP button once to increase the set temperature
by .1 (1)°F°C
■Press the DOWN button to lower the temperature.
Press the DOWN button once to decrease the set
temperature by .1°F(1°C)
NOTES:
■In the Cooling and Heating mode, the temperature can be
set between 61°F and 86°F(16°C and 30°C).
■In Fan Only mode,the temperature cannot be set.
UP
DOWN
Sleep mode
SLEEP mode can be set in Cooling, Heating or Dry operation
mode. This function gives you a more comfortable environment
for sleep.
■In Heating mode, the set temperature will decrease by 6
at most,during 3 hours, then keeps steady.
°F (3°C)
1.
Press MODE to select Cooling, Heating or Dry.
NOTE: Sleep control cannot be selected when Fan Only
or SMART is selected.
2.Press the UP or DOWN button to set the temperature.
3.Press SLEEP. After 5 seconds, the lights on the control panel
display will dim.
■
The appliance will stop operation automatically after operating
for 8 hours.
■In the Cooling mode, if the current room temperature is
below, the temperature will automatically increase
during the first hour after Sleep control is
activated,then remain the same.
If room temperature is 26) or above, set temperature will
not change.
1°F(1°C)
79°F(°C
79°F (26°C)
■
SLEEP
Fan speed is automatically set at low speed.
NOTE:
The air conditioner will return to previous settings after
Sleep control is turned off.
4.To turn off Sleep control, press SLEEP, MODE, ON/OFF,FAN,
SUPER or wait 8 hours for Sleep control to turn off automatically.
The temperature and airflow direction may be adjusted
during Sleep control. The fan speed is automatically set to
Low speed. After 5 seconds, the lights on the control
panel display will dim again.
NOTE:
NOTE:
I FEEL
about 5 seconds, and the transmit signal in the display will
disappear, the I FEEL function will be de-activated.
■
The I FEEL function is active, as a default setting from the factory.
■To de-activate the I FEEL function, press the I FEEL button for
The temperature sensor built into the remote controller is activated.
It can sense its surrounding temperature, and transmit the signal
back to the unit,when the remote control is pointed towards the air
conditioner. The unit can adjust the temperature so as to provide
maximum comfort.
NOTE
:
IFEEL
DIMMER
Press the DIMMER button to turn off the light and the control
panel display.
■
When in DIMMER mode, new control inputs will return lighting
NOTE:
DIMMER
■
Pressing the I FEEL button once will activate I FEEL function
and display to normal.
again.
Manual
View the manual for the Hisense AP-14DR1SFJS2 here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Hisense AP-14DR1SFJS2 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hisense AP-14DR1SFJS2 below.
What does BTU stand for?
BTU stands for British Thermal Unit and is a unit used to indicate cooling power.
What does R-410A stand for?
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
How often should I clean the filters of my Hisense air conditioner?
The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Hisense air conditioner at least four times a year.
Is the manual of the Hisense AP-14DR1SFJS2 available in English?
Yes, the manual of the Hisense AP-14DR1SFJS2 is available in English .
Need help?
Do you have a question about the Hisense and is the answer not in the manual?
Question and answer
Number of questions: 0