Hisense AP-14DR1SFJS2 manual

Hisense AP-14DR1SFJS2
5.9 · 1
PDF manual
 · 44 pages
English
manualHisense AP-14DR1SFJS2
13
Fan Only-Only the fan runs. Press FAN button to adjust
fan speed.
NOTE: Auto fan speed cannot be selected in Fan Only mode.

SMART Mode

Press the SMART button,regardless If the unit is on or off, to set
temperature and fan speed automatically based on the actual
room temperature.
Heating-Heats the room. Press FAN to select the fan speed.
Press the up or down TEMP button to adjust the temperature.
Dry-Dries the room. The air conditioner automatically
selects the temperature. The fan runs on Low speed only.
NOTE: Dry mode should not be used to cool the room.

SMART

72°F 22°C ( )
79°F 26°C ( )
79°F 26°C ( )
73-79°F 23-26°C ( )
70-73°F 21-23°C ( )
70°F 21°C ( )
23-26°C 73-79°F ( )
23°C 73°F ( ) or below
Room temperature decrease
4 2 after operate for 3
minutes
°F( )°C
Operation mode and temperature are determined by indoor temperature.
Temperature, airflow and direction are controlled
automatically in smart mode. However, a decrease or rise of
up to can be set with the remote controller
if you still feel uncomfortable.
4°F 2°C ( )
NOTE:

With Heater models

Cooling only models

SUPER

SUPER button is used to start or stop fast cooling or heating.
1. Press SUPER
button. The air conditioner automatically
sets the fan speed to High and the temperature to 61°F 16°C ( ).
2. To turn off Super control, press any button on the remote
control or control panel except Timer On, Timer Off, Clock,
Dimmer,Ifeel and Swing.
NOTE:
In the SUPER mode you can set airflow direction or timer.
SMART mode is not available in SUPER mode.
SUPER button is ineffective in SMART mode.
SUPER

fast heating

ON
OFF

fast cooling

ON
OFF
Fast heating operates at auto fan speed,changing the set
temperature automatically to 86°F 30°C ( ) .
FAN
SWING
Indoor fan speed alternates among
High, Medium and Low each time
this button is pressed.
Button
Button
Adjustment
High for maximum fan speed

Fan Speed

1. Press FAN button, Choose desired fan speed.
Auto-Automatically controls fan speed depending on
current room temperature and temperature control
setting.
Auto fan speed cannot be selected in Fan Only
mode.
Mid for normal fan speed
Low for minimum fan speed
NOTE:
Room temperature decrease
4 2 after operate for
3 minutes
°F( )°C
A decrease or rise of up to can be set with the
remote controller if you still feel uncomfortable.
4°F (2°C)
26°C 79°F ( )
26°C 79°F ( )

Manual

View the manual for the Hisense AP-14DR1SFJS2 here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Hisense AP-14DR1SFJS2 or do you need help? Ask your question here

Need help?

Do you have a question about the Hisense and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hisense AP-14DR1SFJS2 specifications

Below you will find the product specifications and the manual specifications of the Hisense AP-14DR1SFJS2.

General
BrandHisense
ModelAP-14DR1SFJS2
Productair-conditioning
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hisense AP-14DR1SFJS2 below.

What does BTU stand for?

BTU stands for British Thermal Unit and is a unit used to indicate cooling power.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How often should I clean the filters of my Hisense air conditioner?

The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Hisense air conditioner at least four times a year.

Is the manual of the Hisense AP-14DR1SFJS2 available in English?

Yes, the manual of the Hisense AP-14DR1SFJS2 is available in English .

Is your question not listed? Ask your question here

No results