Hikvision DS-PEA4H-10 manual

Hikvision DS-PEA4H-10
7.5 · 1
PDF manual
 · 72 pages
English
manualHikvision DS-PEA4H-10

Panic Alarm Master Station User Manual

27

Configuring Auto Answering

Purpose:
You are able to enable auto answering function for the master station. If auto answering is enabled, after
receiving the alarm device or the master station call, the master station will automatically answer the call when
the configured auto answering duration arrives.
Steps:
On the call configuration page, click in the Auto Answering Settings line to enter the page.
Slide the slider to enable the auto answering.
Note: The automatic answering can also be turned off through the slider, click OK to save the settings and
the auto answering of the master station will be cancelled. When the master station or the alarm device calls
the master station, the master station needs to answer the call manually.
Enter the auto answering duration. By default, it is 5, the available value is between 0 and 30.
Tap OK to save the settings.
Notes:

If there are more than one call, the master station only automatically answers the first one.

The master station does not automatically answer when is in a state of listening, announcing,
broadcasting, etc., and only the call received in the state where the master station does not have any call
will automatically answer the call.

Configuring Assistant Management

Purpose:
You are able to enable assistant management function for the master station. If the current master station is idle
(unattended), you can enable assistant management, and all calls received in the assistant management state
will be transferred to the assisted master station.
Steps:
On the call configuration page, click in the Assistant Management Settings line to enter the page.
Slide the slider to enable the auto answering.
Note: The assistant management can also be turned off through the slider, click OK to save the settings and
cancel the assistant management state. The call can be answered normally after exiting the managed state.
Tap in the Master Station line to enter the page, and select a master station in the list as the assisted
master station, click OK.
Tap OK to save the settings.
Notes:

The assisted master station should not enable the assistant management, and the master station has
been enabled the assistant management cannot be selected as the assisted master station.

The master station will not automatically exit the assistant management state after restarting.

View the manual for the Hikvision DS-PEA4H-10 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-PEA4H-10 or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Hikvision DS-PEA4H-10 is a wired intercom system with a 10.1-inch high definition touch screen display. The connectivity technology is wired, and it has a 2 MP megapixel camera for clear video quality. The intercom system features a built-in speakerphone, microphone, and speaker(s) for easy communication. The display type is LCD, with color capabilities for a vibrant viewing experience. The DS-PEA4H-10 master station is designed for various security areas such as schools, squares, hospitals, shopping malls, stations, markets, and parks. It supports functions like live view, intercom, and device call, providing a user-friendly interface for seamless operation. The intercom system does not have an autonomy mode, meaning it relies on a continuous power source for operation. The flat-design interface on the touch screen display makes it easy to navigate and use the various functions available on the master station. Overall, the Hikvision DS-PEA4H-10 intercom system is suitable for security applications in a range of public spaces, offering clear communication and monitoring capabilities.

General
BrandHikvision
ModelDS-PEA4H-10 | DS-PEA4H-10
Productintercom system
EAN6941264027027
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Performance
Connectivity technologyWired
Power
Autonomy modeNo
Design
Product colorBlack
Control type-
Display typeLCD
Product colorBlack
Control type-
Technical details
Connectivity technologyWired
ColorYes
SpeakerphoneYes
Number of displays supported-
Maximum number of cameras supported-
Built-in microphoneYes
Camera
Megapixel2 MP
Sensor typeCMOS
Audio
Built-in speaker(s)Yes
Network
Supported network protocolsTCP/IP, HIK-SIP, RTSP
Ethernet interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports1
Ethernet LAN data rates10,100,1000 Mbit/s
Storage
Memory card slotYes
Compatible memory cardsMicroSDXC
Maximum memory card size128 GB
Display
Display diagonal10.1 "
Display technologyLCD/TFT
Display resolution1280 x 800 pixels
Weight & dimensions
Width361 mm
Depth65 mm
Height197 mm
Weight2500 g
Operational conditions
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-PEA4H-10 below.

What is the weight of the Hikvision DS-PEA4H-10?

The Hikvision DS-PEA4H-10 has a weight of 2500 g.

What is the screen size of the Hikvision DS-PEA4H-10?

The screen size of the Hikvision DS-PEA4H-10 is 10.1 ".

What is the height of the Hikvision DS-PEA4H-10?

The Hikvision DS-PEA4H-10 has a height of 197 mm.

What is the screen resolution of the display of the Hikvision DS-PEA4H-10?

The screen resolution of the Hikvision DS-PEA4H-10 is 1280 x 800 pixels.

What is the width of the Hikvision DS-PEA4H-10?

The Hikvision DS-PEA4H-10 has a width of 361 mm.

What is the depth of the Hikvision DS-PEA4H-10?

The Hikvision DS-PEA4H-10 has a depth of 65 mm.

Does Hikvision DS-PEA4H-10 have a built-in microphone?

Yes, Hikvision DS-PEA4H-10 has a built-in microphone. This means that users can easily communicate through the intercom system. It is a common feature in comparable products as well.

What is the display type of Hikvision DS-PEA4H-10?

The display type of Hikvision DS-PEA4H-10 is LCD. This ensures clear visibility for users interacting with the intercom system.

Can Hikvision DS-PEA4H-10 support memory cards?

Yes, Hikvision DS-PEA4H-10 has a memory card slot that supports MicroSDXC cards up to a maximum capacity of 128 GB. This feature allows users to store data conveniently on the device.

What is the Ethernet interface type of Hikvision DS-PEA4H-10?

Hikvision DS-PEA4H-10 has a Gigabit Ethernet interface type, which enables high-speed wired connectivity for reliable communication.

What is the megapixel resolution of Hikvision DS-PEA4H-10?

Hikvision DS-PEA4H-10 has an approximate 2 MP megapixel resolution, providing users with clear and detailed images. This resolution is competitive with other intercom systems in its class.

What should I do if I encounter abnormal operation or privacy leakage while using the Hikvision DS-PEA4H-10 intercom system with internet access?

To address abnormal operation or privacy leakage with internet access on the Hikvision DS-PEA4H-10 intercom system, follow these steps: 1. Access the Panic Alarm Master Station user manual. 2. Navigate to the Password Management Configuration section. 3. Check the Access Lock settings to enable access lock and set user lock parameters. 4. Adjust the Max. Password Attempts to limit the number of login attempts. 5. Set the Lock Duration to specify how long a user will be locked out after exceeding the password attempts. 6. Note the IP Address of the terminal where the locked user logs in. 7. Unlock the user's login lock status on the corresponding IP address if needed. 8. Save the changes made to the settings. 9. Optionally, unlock all users at once by clicking "Unlock All." These steps will help you manage abnormal operation or privacy leakage issues effectively.

How can I ensure that my use of the Hikvision DS-PEA4H-10 intercom system conforms to the surveillance laws in my jurisdiction?

To ensure that your use of the Hikvision DS-PEA4H-10 intercom system conforms to surveillance laws in your jurisdiction, follow these steps: 1. Check all relevant laws in your jurisdiction regarding surveillance to understand the requirements. 2. Verify that your use of the intercom system complies with the applicable laws to avoid any legal issues. 3. Ensure that the installation and operation of the intercom system adhere to privacy regulations and data protection laws. 4. Seek guidance from legal professionals or authorities if you have any doubts about the legality of your surveillance activities. 5. Regularly review and update your knowledge of surveillance laws to stay compliant with any changes in regulations.

Is the manual of the Hikvision DS-PEA4H-10 available in English?

Yes, the manual of the Hikvision DS-PEA4H-10 is available in English .

Is your question not listed? Ask your question here

No results