Hikvision DS-PEA4H-10 manual

Hikvision DS-PEA4H-10
7.5 · 1
PDF manual
 · 72 pages
English
manualHikvision DS-PEA4H-10

DS-PEA4H-10

Panic Alarm Master StaonDiagram ReferencesENGLISH
1
2
3
3
Dimension
4
Acvaon
5
Basic Operaon
6
Communicaon Test
1
Appearance
2
Wiring
a. Indicator
b. Camera
c. Mic Support Interface
d. Broadcast Key
e. Microphone
f. Display Screen
g. Volume Key
h. Mute Key
i. USB 3.0 Interface
j. USB 2.0 Interface
k. microSD Card Interface
l. Camera Angle Adjustment Wheel
m. Built-in Speaker
m1. Handset Interface (Handset)
a. Power Supply (12 VDC) Wiring
b. Network Wiring (Supports PoE)
c. VGA Wiring
d. HDMI Wiring
e. Audio Output Wiring
a. Panic Alarm Master Staon
b. Panic Alarm Master Staon (with Telephone Receiver)
You should acvate the device for the first usage.
1. Power on and wire the network cable. Aer powering on, the display screen will pop up a page for entring acvaon
password.
2. Create a password and confirm the password.
3. Click OK to acvate the device.
b. SIP Server Configuraon c. Device Management291 mm361 mm70 mm34 mm64.8 mm34 mm43 mm 197 mm197 mm
a
a
a
b d
c e
f
g
h i
b
b
l
n1
n2
f
e
c
g
h
i
j
k
d
Scan the QR code to get the user manual of panic alarm master staon.
SpecificationIndicator
Excepon Indicator Flashing Yellow: Master Staon Excepon
Solid Blue: Master Staon Powered on
Informaon Indicator
Power Supply Indicator
COPYRIGHT ©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all informaon, including, among others, wordings, pictures, graphs are the properes
of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer referred to be
“Hikvision”). This user manual (hereinaer referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, parally or wholly, by any means, without the prior wrien
permission of Hikvision. Unless otherwise spulated, Hikvision does not make any warranes,
guarantees or representaons, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to the Panic Alarm Master Staon.
The Manual includes instrucons for using and managing the product. Pictures, charts, images
and all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to firmware updates or other
reasons. Please find the latest version in the company website (hp://overseas.hikvi-
sion.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement and other Hikvision’s trademarks and logos are
the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned
below are the properes of their respecve owners.

Product Informaon

For SIP server parameters configuraon of alarm devices and master staons, and device management, refer to User
Manual of Panic Alarm Master Staon.
The default project password is 888999. For security reasons, you should change it in Password Sengs
on the project
configuraon page aer the inial login.
Aer acvang the device, you should configure the network parameters and SIP server for communicaon between
panic alarm master staon (hereinaer called “master staon”) and alarm devices, or other master staons.
Click System Config
- , and then enter the project password to enter the project configuraon page.
1. On the project configuraon page, click Network
, enter the IP address, gateway address and subnet mask of the
master staon.
2. Click Save to save network parameters.
1. On the project configuraon page, click SIP Server
, you should configure IP Address, Port No., Device ID, Device
Locaon and Register Period of the master staon.
IP Address
: The IP address of SIP server. Aer configuring the SIP server address, the device will register to the SIP server.
When the master staon acts as a SIP server, set the IP Address
the same as the IP address of the master staon. The
devices register to the same SIP server can conmmunicate whit each other.
Port No
.: By default, it is 5065.
Device ID: The available ID number should between 0 and 999999.
Device Locaon: Enter the device locaon for easy management.
Register Period (min): By default, it is 10.
a. Network Parameters Configuraon
m
f. Audio Input Wiring
g. RS-485 Wiring
h. Alarm Output Wiring
i. Alarm Input Wiring
UD13088B
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the RE Direcve 2014/53/EU, the EMC Direcve 2014/30/EU, the LVD Direcve
2014/35/EU, the RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collecon points. For more informaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentaon for specific baery informaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the baery to your supplier or to a designated
collecon point. For more informaon see:www.recyclethis.info
FCC Informaon
Please take aenon that changes or modificaon not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
The power supply must conform to LPS. Use only power supplies listed in the user manual:
The acvaon password is used when adding device to the client soware. And the default username is admin. You can
also acvate the device via SADP tool or iVMS-4200 client soware. For detailed sengs, please refer to User Manual of
Panic Alarm Master Staon, you can contact the technical support for the user manual.
Click System Config
- to enter the device configuraon page. You can view all devices (alarm devices and master
staons) which have the same IP address as the SIP server’s, and then you can add groups for device group management.
1. Click Dial-up
or pick up the handset to enter quick dialing page.
2. Enter the ID of alarm device via the so keypad and click to enter the live view page.
If you are able to enter the live view page normally, the communicaon is started.
Camera CMOS, 2 MP
Resoluon1920 x 1080
Frame rate PAL: 25 FPS, NTSC: 30 FPS
Screen
10.1 inch colorful TFT LCD, 1280 × 800
Operaon mode Touch screen, and mechanical key
User interface Flat DesignAudio input
Built-in microphone, 3.5 mm input,
handset
Audio output
Built-in loudspeaker, 3.5 mm output
and handset
Audio encoding/decoding
standard
G.711U, G726, AAC, and Opus
Audio compression code rate
64 Kbps32 kbps16 Kbps
Network
Network protocol TCP/IP, HIK-SIP (Private protocol), SIP, RTSP
Network interface
1 RJ45, 10M/100M/1000M self-adapve
RS-485 2, RS-485 half-duplex interface
VideoDisplayAudioInterface
I/O input 4
I/O output 4, relay output
Handset 1, for handset RJ11
VGA output
1
HDMI output 1
MicroSD
1, microSD (128 GB)
USB
1, USB 3.0
1, USB 2.0
Power 12 VDC, PoE (IEEE 802.3 at/af)
Consumpon
15 W
Operang temperature
-10
to 55
Operang humidity
10 to 90
Dimension (L × H × D
w
ith handset: 361 mm × 197 mm × 65 mm
( 14.2" × 7.8" × 2.6")
without handset: 291 mm × 197 mm × 41
mm (11.5" × 7.8" × 1.6")
Weight
2.5 kg (88.2 oz)
OthersInterface
Model Manufacturer
KPL-040F-VI Channel Well Technology
Flashing Green: Receiving Alarm Informaon

View the manual for the Hikvision DS-PEA4H-10 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-PEA4H-10 or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Hikvision DS-PEA4H-10 is a wired intercom system with a 10.1-inch high definition touch screen display. The connectivity technology is wired, and it has a 2 MP megapixel camera for clear video quality. The intercom system features a built-in speakerphone, microphone, and speaker(s) for easy communication. The display type is LCD, with color capabilities for a vibrant viewing experience. The DS-PEA4H-10 master station is designed for various security areas such as schools, squares, hospitals, shopping malls, stations, markets, and parks. It supports functions like live view, intercom, and device call, providing a user-friendly interface for seamless operation. The intercom system does not have an autonomy mode, meaning it relies on a continuous power source for operation. The flat-design interface on the touch screen display makes it easy to navigate and use the various functions available on the master station. Overall, the Hikvision DS-PEA4H-10 intercom system is suitable for security applications in a range of public spaces, offering clear communication and monitoring capabilities.

General
BrandHikvision
ModelDS-PEA4H-10 | DS-PEA4H-10
Productintercom system
EAN6941264027027
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Performance
Connectivity technologyWired
Power
Autonomy modeNo
Design
Product colorBlack
Control type-
Display typeLCD
Product colorBlack
Control type-
Technical details
Connectivity technologyWired
ColorYes
SpeakerphoneYes
Number of displays supported-
Maximum number of cameras supported-
Built-in microphoneYes
Camera
Megapixel2 MP
Sensor typeCMOS
Audio
Built-in speaker(s)Yes
Network
Supported network protocolsTCP/IP, HIK-SIP, RTSP
Ethernet interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports1
Ethernet LAN data rates10,100,1000 Mbit/s
Storage
Memory card slotYes
Compatible memory cardsMicroSDXC
Maximum memory card size128 GB
Display
Display diagonal10.1 "
Display technologyLCD/TFT
Display resolution1280 x 800 pixels
Weight & dimensions
Width361 mm
Depth65 mm
Height197 mm
Weight2500 g
Operational conditions
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-PEA4H-10 below.

What is the weight of the Hikvision DS-PEA4H-10?

The Hikvision DS-PEA4H-10 has a weight of 2500 g.

What is the screen size of the Hikvision DS-PEA4H-10?

The screen size of the Hikvision DS-PEA4H-10 is 10.1 ".

What is the height of the Hikvision DS-PEA4H-10?

The Hikvision DS-PEA4H-10 has a height of 197 mm.

What is the screen resolution of the display of the Hikvision DS-PEA4H-10?

The screen resolution of the Hikvision DS-PEA4H-10 is 1280 x 800 pixels.

What is the width of the Hikvision DS-PEA4H-10?

The Hikvision DS-PEA4H-10 has a width of 361 mm.

What is the depth of the Hikvision DS-PEA4H-10?

The Hikvision DS-PEA4H-10 has a depth of 65 mm.

Does Hikvision DS-PEA4H-10 have a built-in microphone?

Yes, Hikvision DS-PEA4H-10 has a built-in microphone. This means that users can easily communicate through the intercom system. It is a common feature in comparable products as well.

What is the display type of Hikvision DS-PEA4H-10?

The display type of Hikvision DS-PEA4H-10 is LCD. This ensures clear visibility for users interacting with the intercom system.

Can Hikvision DS-PEA4H-10 support memory cards?

Yes, Hikvision DS-PEA4H-10 has a memory card slot that supports MicroSDXC cards up to a maximum capacity of 128 GB. This feature allows users to store data conveniently on the device.

What is the Ethernet interface type of Hikvision DS-PEA4H-10?

Hikvision DS-PEA4H-10 has a Gigabit Ethernet interface type, which enables high-speed wired connectivity for reliable communication.

What is the megapixel resolution of Hikvision DS-PEA4H-10?

Hikvision DS-PEA4H-10 has an approximate 2 MP megapixel resolution, providing users with clear and detailed images. This resolution is competitive with other intercom systems in its class.

What should I do if I encounter abnormal operation or privacy leakage while using the Hikvision DS-PEA4H-10 intercom system with internet access?

To address abnormal operation or privacy leakage with internet access on the Hikvision DS-PEA4H-10 intercom system, follow these steps: 1. Access the Panic Alarm Master Station user manual. 2. Navigate to the Password Management Configuration section. 3. Check the Access Lock settings to enable access lock and set user lock parameters. 4. Adjust the Max. Password Attempts to limit the number of login attempts. 5. Set the Lock Duration to specify how long a user will be locked out after exceeding the password attempts. 6. Note the IP Address of the terminal where the locked user logs in. 7. Unlock the user's login lock status on the corresponding IP address if needed. 8. Save the changes made to the settings. 9. Optionally, unlock all users at once by clicking "Unlock All." These steps will help you manage abnormal operation or privacy leakage issues effectively.

How can I ensure that my use of the Hikvision DS-PEA4H-10 intercom system conforms to the surveillance laws in my jurisdiction?

To ensure that your use of the Hikvision DS-PEA4H-10 intercom system conforms to surveillance laws in your jurisdiction, follow these steps: 1. Check all relevant laws in your jurisdiction regarding surveillance to understand the requirements. 2. Verify that your use of the intercom system complies with the applicable laws to avoid any legal issues. 3. Ensure that the installation and operation of the intercom system adhere to privacy regulations and data protection laws. 4. Seek guidance from legal professionals or authorities if you have any doubts about the legality of your surveillance activities. 5. Regularly review and update your knowledge of surveillance laws to stay compliant with any changes in regulations.

Is the manual of the Hikvision DS-PEA4H-10 available in English?

Yes, the manual of the Hikvision DS-PEA4H-10 is available in English .

Is your question not listed? Ask your question here

No results