Panic Alarm Station Configuration Guide
67
Backup and Reset
Click Maintenance and Security → Maintenance → Backup and Reset.
Export
Click Export to export configuration file, which includes device parameters.
Restore to Default Settings
Click Restore, device parameters except for IP address will restore to default settings.
Restore to Factory Settings
Click Default, all device parameters will restore to default settings, and you need to activate
the device when you use it again.
Import Parameters
Select file and click Import, the configuration file will be imported to device.
Log
Click Maintenance and Security → Maintenance → Log, set Major Type, Minor Type and Select
Time, click Search, the query results will be shown.
Security Audit Log
Click Maintenance and Security → Maintenance → Security Audit Log, enable Log Upload Server.
Configure Log Server IP and Log Server Port, and import CA Certificate.
Audio&Video Self-Test
Click Maintenance and Security → Maintenance → Audio&Video Self-Test, set manual test or auto
test.
Auto Test
Audio and video self-test will be automatically performed according to the set detection time.
Restore to Default Settings
Click Test, the results will be shown in the result table.
4.3.2 Security
IP Address Filter
Steps
1. Click Maintenance and Security → Security → IP Address Filter.
2. Enable filter, click +Add to add IP address to the list.
3. Click to change IP address. Click to delete address.
4. Click Save.
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0