Panic Alarm Station Configuration Guide
60
After enabling, when the alarm is recovered, the report will be uploaded to the center.
4. Check the Link Relay, Linked Channel, etc.
5. (Optional) Click Copy to, copy the zone parameters to other zones.
6. Click Save.
Siren Settings
Steps
1. Click Device → Siren.
2. Enable Sounder Switch.
3. Click Save.
Strobe Light Settings
Steps
1. Click Device → Strobe Light.
2. Enable Strobe Light Switch.
3. Enable Scheduled Flashing, enter lighting duration and light off duration. The strobe light will
flash according to the scheduled time.
4. Enable Flashing Schedule.
5. Click Flashing, move the mouse over the time bar, and long press and drag the left mouse
button to draw the time period.
Figure 4-4 Flashing Schedule Settings
6. Edit the time period.
Edit Time Period Length and Start/End Time
Click the drawn time period to adjust the start/end time in the pop-up window.
Delete Time Period
Click Erase, long press and drag the mouse on the drawn time period to erase.
Delete All Time Period
Click … → Clear All, you can delete all drawn time period.
Copy Time Period
Move the mouse to the time bar, click
in the right of the day, and select time period to
copy to that day. Click OK to save.
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0