Panic Alarm Station Configuration Guide
58
sharpness of the image.
Backlight Settings
Enable WDR or HLC. Drag the slider or enter a number to adjust the wide dynamic level.
Video Adjustment
Select Mirror. The video can show left/right, up/down or center images. Or you can select to
disable this function.
Enable Rotate, the video can rotate.
Select Video Standard as PAL(50HZ) or NTSC(60HZ)
OSD Settigs
Steps
1. Click Image → OSD Settings.
2. Set parameters.
Change Display Position
Drag the red box on the preview interface to change the position of the displayed informatio.
After saving, the displayed information will be updated to a new position.
Change Display Format
- Date Format
You can select the date display format in the date format drop-down box.
- Time Format
You can select 24-hour or 12-hour format in the time format drop-down box.
- Display Mode
According to whether the display information is transparent or flashing, there are four freely
combined display mode for selection. For example, if the display mode is transparent and
flashing, the information will be displayed with a certain transparency and will flash.
- OSD Size
You can select the font size in the OSD size drop-down box.
- Alignment
You can select Align Left, Custom, Align Right or International Mode in the alignment drop-
down box.
Change Display Content
You can select the display content on the image, including the channel name, date and week,
or change the channel name and add customized display content.
- Display Content
Select whether to display the name, date or week according to your need. After selecting, the
corresponding information will be displayed on the image.
- Channel Name
You can change the channel name in the channel name text box.
- Custom
In the Text Overlay interface below, click +Add, and the text input box will appear. Enter
content, and the customized content will be displayed in the image.
3. Change the image refresh time interval above the screen.
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0