Panic Alarm Station Configuration Guide
52
from the FTP server according to the interval.
Manual
Time
Sync.
Click
Sync.
with
computer
time
, the computer time will be synced to the device.
Enable DST. Configure Start Time, End Time and DST Bias.
Click Save.
System Settings – About
Click System → System Settings → Time Settings.
Click View Licenses to view open source software licenses.
User Management
Click System → User Management.
You can see all online users.
4.2.2 Network
Network Settings
Steps
1. Click Network → Network Settings → TCP/IP.
2. Enter IPv4 Address, IPv4 Subnet Mask, etc., or enable DHCP to get address automatically.
3. Click Save.
Network Service
Steps
1. Click Network → Network Service.
2. Configure port parameters.
Note
Please do not change the default port parameters at will. When there is a port conflict and you
need to change the port number, please change the following information accordingly.
HTTP(S)
- HTTP
The default HTTP port is 80. To change the port, you need to add the changed port number
after the address when you log in using the browser. For example, if the HTTP port number
changes to 81, you need to enter http://192.168.1.64:81 (The front part of ":" is the current IP
address of the device).
- HTTPS
The default HTTPS port is 443. The range is 1 to 65535.
- HTTP Listening
Select Server Type as IP or Domain Name. Enter IP or domain name, URL and port.
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0