Panic Alarm Station Configuration Guide
21
3.3.4 Set Voice Prompt
Steps
1. Click to enter the Remote Configuration page, go to Output Settings → Voice Prompt.
Figure 3-16 Voice Prompt Configuration Page
2. Set the Center Busy File, Refuse Prompt, Voice Talk Ending Prompt, and Panic Alarm Prompt
Sound.
3. Optional: Configure the mute program.
1) Check Enable to enable the mute program.
2) Click and drag the mouse on the time bar to draw the scheduled time period.
3) Optional: Edit the time period.
● Modify the time period
Click and select the added time period, drag to modify the time period position; click and
select the added time period, then moves the cursor to both ends of the time period, when
the cursor becomes a double arrow, you can drag the mouse left and right to modify the
time period.
● Delete one time period
Click and select the time period, and click Delete to delete the selected time period.
● Delete all time periods
Click Clear to delete all time periods.
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0