Hikvision DS-PEA22-F manual

Hikvision DS-PEA22-F
8.1 · 1
PDF manual
 · 78 pages
English
manualHikvision DS-PEA22-F

Panic Alarm Station Configuration Guide

3
Figure 2-1 Activate via SADP
Status of the device becomes Active after successful activation.
5. Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same subnet as your computer by either modifying the IP
address manually or checking Enable DHCP.
3) Input the admin password and click Modify to activate your IP address modification.

2.2 Activate Device via Client Software

Before You Start
Get the iVMS-4200 client software from the supplied disk or the official website
http://www.hikvision.com/en/. Install the software by following the prompts.
The device and the PC that runs the software should be in the same subnet.
Steps
1. Run the client software.
2. Enter Device Management Device in the Maintenance and Management list.
3. Click Online Device.
4. Check the device status from the online device list, and select an inactive device.
5. Click Activate.
6. Create and confirm the admin password of the device.

View the manual for the Hikvision DS-PEA22-F here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-PEA22-F or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandHikvision
ModelDS-PEA22-F | DS-PEA22-F(B)
Productintercom system
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Performance
Connectivity technologyWired
Smartphone remote supportNo
Features
Product typeEthernet alarm communicator
Ethernet interface typeFast Ethernet
Ethernet LAN data rates10, 100 Mbit/s
Connectivity technologyWired
Connectivity technologyWired
Panic buttonYes
Connector typeRJ-45
Buttons quantity1
SpeakerphoneYes
Supported network protocolsTCP/IP, RTSP, SNMP, HIK-SIP
Camera includedYes
Outdoor units quantity1
Packaging content
Alarm control panelYes
Number of door/window sensors- pc(s)
Number of motion sensors- pc(s)
Outdoor unit includedYes
Indoor unit included-
Weight & dimensions
Width128 mm
Depth58 mm
Height218 mm
Width128 mm
Depth58 mm
Height218 mm
Design
Product colorSilver
PlacementWall
Product colorSilver
Power
Outdoor unit power typeAC
Outdoor unit power typeAC
Operational conditions
Operating temperature (T-T)-40 - 60 °C
Operating temperature (T-T)-40 - 60 °C
Technical details
Connectivity technologyWired
Connector typeRJ-45
SpeakerphoneYes
Packaging data
Outdoor unit includedYes
Indoor unit included-
Camera includedYes
Network
Supported network protocolsTCP/IP, RTSP, SNMP, HIK-SIP
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-PEA22-F below.

What is the height of the Hikvision DS-PEA22-F?

The Hikvision DS-PEA22-F has a height of 218 mm.

What is the width of the Hikvision DS-PEA22-F?

The Hikvision DS-PEA22-F has a width of 128 mm.

What is the depth of the Hikvision DS-PEA22-F?

The Hikvision DS-PEA22-F has a depth of 58 mm.

Is the manual of the Hikvision DS-PEA22-F available in English?

Yes, the manual of the Hikvision DS-PEA22-F is available in English .

Is your question not listed? Ask your question here

No results