When the video intercom between you and the resident is realized, you can speak to
the resident, and the live view of door station will be displayed on the connected
indoor station.
When live view of door station is displayed on other devices or door station is calling
resident, the door station will detect the brightness of video. When the brightness is
lower than the expected threshold, the supplement light will be enabled.
When the supplement light is enabled, the backlight of key will be auto-enabled,
otherwise, the door station will detect the brightness of live view and enable the
backlight of key when the brightness of live view is lower than expected threshold.
9.1.2Calling Resident (DS-KV8102-XP)
You can call the resident by pressing the call button. For device DS-KV8102-IP/VP, there
is only 1 call button.
Default settings of call button: when you press the call button, it calls the resident;
and when you hold down the call button, it calls the center.
You can change the calling mode of the call button via Batch Configuration Tool or
iVMS-4200 client software. See 7.4.2 Video Intercom for detail steps.
Figure 9-2Call Button of DS-KV8102-XP
Steps:
1.Press the corresponding call button of the resident.
View the manual for the Hikvision DS-KV8102-VP here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KV8102-VP or do you need help? Ask your question here
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0