Hikvision DS-KIS603-P manual

Hikvision DS-KIS603-P
9.2 · 3
PDF manual
 · 72 pages
English
manualHikvision DS-KIS603-P

DS-KV6113-WPE1

Video Intercom Villa Door StaonMicrophone
2
Indicator
3
Buon
4
Card Reading Area
5
Loudspeaker
6
Terminals
7
Debugging Port
8
Note: The debugging port is used for debugging only.
Terminal and Wiring
2
Installaon Accessory
3
Diagram ReferencesAppearance
1
Surface Mounng without Protecve Shield1. Sck the mounng template on the wall. Drill screw holes according to the mounng template. Remove the template from the wall.2. Secure the mounng plate on the wall with 4 supplied screws according to the screw holes.3. Install the villa door staon to the mounng plate. Fix the device on the mounng plate with the set screw.Surface Mounng with Protecve Shield Make sure all related equipments are power-off during the installaon. Tools that you need to prepare for installaon:Drill (ø2.846) and gradienter. Purchase the protecve shield before installaon.Before You Start1. Sck the mounng template on the wall. Drill the screw holes according to the mounng template. Remove the template from the wall.2. Align the protecve shield with the mounng template.3. Secure the mounng plate and protecve shield on the wall with 4 supplied screws according to the screw holes.4. Install the villa door staon to the mounng plate. Fix the device on the mounng plate with the set screw.

11

Configuraon via Web
5
You are required to acvate the device first by sengs a strong password before you can use the device.Acvate Device via Web
1
Access to the Device by Web Browsers
2
1. In the browser address bar, enter the IP address of the device, and press the Enter key to enter the login page.2. Enter the user name and password and click Login.
Refers to Video Intercom Villa Door Staon User Manual (scan the QR code) for details.
1
TAMPER
9
4
2
3
4
5
6
7
8
9
10
11
12
Exit Button
TO EXIT
2
1
3
ScrewsScrewVilla Door StationMounting Plate Mounting Template Wall
1
3
4
2
ScrewsScrewsScrewVilla Door StationMounting Plate Protective Shield Mounting Template WallThe re comme nded d istan ce from t he grou nd lev el is 1.4 0adju stabl e depe nds on th e heigh t of body.102023104Hole1Hole2Hole1Hole1 Hole1102.58
1.18
Unit : mm
6.2
39.24
3.45
3
Orange RS-485+Yellow RS-485-Red 12 VDCBlack GNDWhite AIN1White AIN2White AIN3White AIN4Yellow NCGreen COMBlue NOBlack GNDBlack GND
PRESS
PowerInputReserved
1
2
Surface Mounng without Protecve ShieldSurface Mounng with Protecve Shield
1
CameraSet Screw
10
TF Card Slot(Reserved)
11
Network Interface
12
Indicator DescriponUnlock: Green Call: Orange Communicate: WhiteNC: Door Lock Relay Output (NC)NO: Door Lock Relay Output (NO)COM: Common InterfaceAIN1: For the access of Door ContactAIN3: For the access of Exit BuonAIN2&AIN4: Reserved485-: RS-485 Interface (Reserved)485+: RS-485 Interface (Reserved)12 VDC IN: Power Supply InputGND: GroundingMounng Template
2
1
Mounng Plate
Note: The dimension of the mounng plate is 102.58 mm × 39.24 mm × 6.2 mm.
Installaon
4
Note: Video intercom villa door staon supports surface mounng.
Default parameters of door staon are as follows: Default IP Address: 192.0.0.65. Default Port No.:8000. Default User Name: admin1. Power on the device, and connect the device to the network.2. Enter the IP address into the address bar of the web browser, and click Enter to enter the acvaon page.Note: The computer and the device should belongs to the same subnet.3. Create and enter a password into the password field.4. Confirm the password.5. Click OK to acvate the device.Note: When the device is not acvated, the basic operaon and remote configuraon of device cannot be performed.Communicate with Indoor Staon
3
1. Click Sengs -> Intercom -> Press Buon to Call to enter the sengs page.2. Set the parameters. - Edit call No. for every buon. - Check Call Management Center to set the buon calling center.Note: If you check Call Management Center and set the call No. as well, call management center has higher privilege than call No.3. Press buon to call indoor staon.Issue Card
4
1. Click Sengs -> Access Control and Elevator Control to enter the sengs page.2. Click Issue Card. Present the card on the card reading area.3. When issuing finished, the windows pop up on the sengs page.Note: Only Mifare card supported, and Mifare card with non-standard shape is recommended. Up to 10000 cards can be issued and managed by V series door staon. A voice prompt (No more cards can be issued.) can be heard when the issued card amount exceeds the upper limit.Unlock Door
5
Aer issuing cards, you can unlock the door by presenng the issued cards.ModelReceived frequencyTransmied frequencyBandwidthFrequency power802.11b:16dBm +/- 1.5dBm802.11g:15dBm +/- 1.5dBm802.11n(ht20):14dBm +/- 1.5dBm802.11n(ht40):12dBm +/- 1.5dBmDS-KV6113-
WPE1
2.4 to 2.4835GHz2.4 to 2.4835GHz20 to 40MHz
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
For RED-Direcve 2014/53/EU
The frequency, mode and the maximum transmied power in EU are listed below:
The simplified declaraon of conformity Hereby, Hangzhou Hikvision Digital Technology Co.,
Ltd.(”Hikvision”) declares that the DS-KV6113-WPE1 device complies with the requirements of Direcve
2014/53/EU of the European Parliament and of the Council of April 16, 2014 on the harmonizaon of the
laws of the Member States relang to making radio equipment available on the market and repealing
Direcve 1999/5/EC. The full text of the declaraon of conformity is available at the Hikvision website
hp://www.hikvisioneurope.com/portal.
ENGLISH
2

View the manual for the Hikvision DS-KIS603-P here, for free. This manual comes under the category intercom systems and has been rated by 3 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KIS603-P or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Hikvision DS-KIS603-P is an intercom system that allows for clear and convenient communication within a designated area. It is designed to provide reliable and efficient audio and video transmission, enhancing security and convenience in various settings. This intercom system boasts a sleek and modern design, seamlessly fitting into any environment. It is equipped with a high-resolution camera that delivers clear and sharp video footage, ensuring a comprehensive view of the area. The camera also supports night vision, allowing for continuous monitoring around the clock. With its wide-angle lens, the DS-KIS603-P provides a broad field of view, minimizing blind spots and maximizing visual coverage. The intercom system also includes a built-in microphone and speaker, facilitating two-way audio communication between parties. Designed with user convenience in mind, this intercom system supports remote monitoring and control. Users can remotely access the system via a mobile application, enabling them to communicate and monitor the designated area from anywhere at any time. In addition to its advanced audio and video capabilities, the DS-KIS603-P is built to withstand varying weather conditions. It is constructed with durable and weatherproof materials, ensuring long-term reliability and functionality. Overall, the Hikvision DS-KIS603-P intercom system provides a reliable and efficient communication solution, with its high-quality audio and video transmission, user-friendly interface, and durable design. It can be utilized in a variety of environments, such as residential complexes, business premises, and public facilities, enhancing security and convenience for users.

General
BrandHikvision
ModelDS-KIS603-P
Productintercom system
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-KIS603-P below.

How do I unlock the door using the Hikvision DS-KIS603-P intercom system?

To unlock the door using the Hikvision DS-KIS603-P intercom system, follow these steps: 1. Access the door parameters: On the intercom system, navigate to the door parameters settings. 2. Select the door and edit the door name: Choose the specific door you want to unlock and edit its name if necessary. 3. Edit the open duration: Set the duration for which the door will remain open once unlocked. Adjust the open duration according to your preference. 4. Set the door contact status: Configure the door contact status, which determines whether the door is locked or unlocked. 5. Save the settings: Click on the "Save" button to enable the changes you made. Please note that these steps are based on the information provided for the Hikvision DS-KIS603-P intercom system. Make sure to refer to the user manual for detailed instructions specific to your device.

Why is the call button not working on my Hikvision DS-KIS603-P intercom system?

There could be several reasons why the call button is not working on your Hikvision DS-KIS603-P intercom system. Here are some troubleshooting steps you can try: 1. Check the network connection: Ensure that the intercom system is properly connected to the network. Verify the network settings and make sure there is a stable internet connection. 2. Verify the call settings: Access the intercom system settings and confirm that the call settings are configured correctly. Check if the call button is enabled and assigned to the appropriate function. 3. Check the client software: If you are using client software to receive calls, ensure that it is installed correctly and up to date. Check for any software updates and install them if available. 4. Test with another device: Try using a different device, such as a smartphone or tablet, to make a call to the intercom system. This will help determine if the issue is specific to the call button or the device you are using. 5. Contact technical support: If the issue persists, it is recommended to contact Hikvision technical support for further assistance. They can provide specific troubleshooting steps based on your situation. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific configuration and setup of your intercom system.

How do I communicate with someone using the Hikvision DS-KIS603-P intercom system?

To communicate with someone using the Hikvision DS-KIS603-P intercom system, follow these steps: 1. Start the client software: Open the client software on your device. 2. Receive a call: When someone initiates a call from the door station, a pop-up dialog will appear on the client software. Click on the "Answer" button to accept the call. If you do not want to answer the call, click on the "Hang Up" button to decline it. 3. Adjust the volume: Once you answer the call, you will enter the "In Call" page. Use the volume controls to adjust the loudspeaker and microphone volume according to your preference. 4. Unlock the door remotely (optional): If the door station is equipped with a door lock, you can click on the "Unlock" button to open the door remotely. Please note that these steps are based on the information provided for the Hikvision DS-KIS603-P intercom system. The specific features and functionalities may vary depending on the configuration and setup of your device.

What information is provided in Chapter 1 of the user manual for the Hikvision DS-KIS603-P intercom system?

Chapter 1 of the user manual for the Hikvision DS-KIS603-P intercom system provides information about the appearance of the device. Here are the key details mentioned in Chapter 1: - Appearance: The chapter describes the front panel and rear panel of the intercom system. It includes a figure showing the front panel with the microphone, camera, and indicator. The unlock, call, and communicate buttons are also mentioned. Please note that the specific content and layout of Chapter 1 may vary in the actual manual. It is recommended to refer to the user manual for detailed information about the appearance and functionality of the Hikvision DS-KIS603-P intercom system.

Is the manual of the Hikvision DS-KIS603-P available in English?

Yes, the manual of the Hikvision DS-KIS603-P is available in English .

Is your question not listed? Ask your question here

No results