Hikvision DS-KH9310-WTE1 manual

Hikvision DS-KH9310-WTE1
7.9 · 1
PDF manual
 · 72 pages
English
manualHikvision DS-KH9310-WTE1

DS-KH9310-WTE1

Android Indoor Staon
UD19189B
1
2
1
2
3
7 8
54
9
10
11
6
3
3
AIN8
AIN7
AIN6
AIN5
AIN4
AIN3
AIN2
AIN1
GND
GND
RS485-RS485+
COM2
NO2
COM1
NO1
Alarm TerminalsRS485/Relay Interface
122
1.5
Unit:mm105.5
92
Rear Panel (without Interface)ScrewWall Mounng Plate Gang Box WallLock Catch Lock CatchLock Catch Lock Catch
Hook
Hook
Hook
Hook
Rear Panel (without Interface)ScrewWall Mounng Plate Gang Box
Wall
Lock Catch Lock CatchLock Catch Lock Catch
Hook
Hook
Hook
Hook
Note: If you use the gang box (55 mm (width) × 101 mm (length) × 38.5 mm (depth)) to install, you should set the screws to le and right screw holes.
Note: If you use the gang box (75 mm (width) × 75 mm (length) × 46 mm (depth)) to install, you should set the screws to up and down screw holes.
Scan the QR code to get the configuraon guide for detailed informaon.Scan the QR code to get the operaon guide for detailed informaon.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Diagram ReferencesENGLISH
Appearance
Installaon
Before you begin:
Wall Mounng with Gang Box
1
3
Terminal
2
Screen Microphone Unlock Buon
1 2 3 4
5 6 7
Make sure the device in the package is in good condion and all the assembly parts are included.
The power supply of the indoor staon is 12 VDC. Make sure your power supply matches your indoor
staon.
Make sure all related equipments are power-off during the installaon.
Check the product specificaon for the installaon environment.
The wall mounng plate and the gang box are required to install the indoor staon onto the wall.
There are 2 sizes of the gang boxes adapted to the device.
Size 1: 75 mm (width) × 75 mm (length) × 46 mm (depth).
Size 2: 55 mm (width) × 101 mm (length) × 38.5 mm (depth).
1. Cave a hole in the wall.
Note: The suggested dimension of the installaon hole should be larger than the gang box.
2. Insert a gang box to the hole chiseled on the wall.
3. Fix the wall mounng plate to the gang box with 2 screws.
Notes
If you install the device with a gang box (75 mm (width) × 75 mm (length) × 46 mm (depth)), the upper and lower holes
will be applies.
If you install the device with a gang box (55 mm (width) × 101 mm (length) × 38.5 mm (depth)), the upper and lower
holes will be applies.
4. Hook the indoor staon to the wall mounng plate ghtly by inserng the plate hooks into the slots on
the rear panel of the indoor staon, during which the lock catch will be locked automacally.
Mounng Accessories
RS-485/Relay Interface
Power Supply Interface
Alarm Terminals
9 10 Reserved 11 TAMPERLoudspeaker
AIN1: Alarm Input 1
AIN2: Alarm Input 2
AIN3: Alarm Input 3
AIN4: Alarm Input 4
NO1/NO2: Normally Open
COM1/COM2: Common Interface
RS485-/RS485+: RS-485 Communicaon Interface
AIN5: Alarm Input 5
AIN6: Alarm Input 6
AIN7: Alarm Input 7
AIN8: Alarm Input 8
GND: Grounding
Debugging Port 8 microUSB Interface
Note: The appearance of the device varies according to different models. Refers to the actual device for detailed
informaon.
Note: For Wiring descripon, refers to the User Manual.
Refer to Video Intercom Network Indoor Staon Configuraon Guide (scan the QR code) for details.
Refer to Video Intercom Network Indoor Staon Operaon Guide (scan the QR code) for details.
Acvate Indoor Staon
Geng Started
4
1. Choose Language and tap Next.
2. Set network parameters and tap Next.
- Edit Local IP, Subnet Mask and Gateway parameters.
- Enable DHCP, the device will get network parameters automacally.
3. Configure the indoor staon and tap Next.
a. Select Indoor Staon Type.
b. Edit Floor and Room No.
4. Linked related devices and tap Next. If the device and the indoor staon are in the
same LAN, the device will be displayed in the list. Tap the device or enter the serial No.
to link.
a. Tap the door staon in the list to link.
b. Tap the sengs icon to pop up the Network Sengs page.
c. Edit the network parameters of the door staon manually or enable DHCP to get
the network parameters automacally.
d. Oponal: Enable Synchronize Language to synchronize the Language of door
staon with indoor staon.
e. Tap OK to save the sengs.
5. Tap Finish to save the sengs.
1. Power on the device. It will enter the acvaon page automacally.
2. Create a password and confirm it.
3. Tap OK to acvate the indoor staon.
You are required to acvate the device first by seng a strong password before
you can use the device.
1
Quick Configuraon
2
The power supply must conform to LPS. The recommended adaptor models and
manufacturers are shown as below. Use the aached adaptor, and do not change the
adaptor randomly.
Model Current Manufacturer Standard
MSA-C1500IC12.0-18P -US 1.5 A MOSO POWER SUPPLY TECHNOLOGY CO.,LTD PG
TS-A018-120015AD 1.5 A SHENZHEN TRANSIN TECHNOLOGIES CO.,LTD PG
12 Network Interface
12

View the manual for the Hikvision DS-KH9310-WTE1 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KH9310-WTE1 or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Hikvision DS-KH9310-WTE1 is an intercom system that offers reliable and efficient communication in various settings. This device is designed to provide clear audio and video transmission, making it suitable for use in residential, commercial, and institutional environments. The DS-KH9310-WTE1 features a user-friendly interface with a 10-inch touch screen display, allowing for easy navigation and operation. The touch screen provides a high-resolution view of the video feed and enables users to quickly access functions and settings. Equipped with advanced technology, this intercom system supports real-time video and audio communication, allowing users to communicate with individuals both inside and outside the premises. With integrated noise reduction and echo cancellation features, the DS-KH9310-WTE1 ensures crystal clear audio transmission, eliminating any distortion or interference. This intercom system also offers a range of additional features, such as remote unlocking, visitor snapshot, and third-party device integration. These features enhance security and convenience by enabling users to remotely control access to their premises and monitor visitors. The DS-KH9310-WTE1 is designed with durability in mind, featuring a sturdy construction that can withstand harsh environments. Its sleek and modern design blends well with various decor styles, making it an aesthetically pleasing addition to any setting. Overall, the Hikvision DS-KH9310-WTE1 is a reliable and efficient intercom system that provides clear audio and video communication. With its user-friendly interface and advanced features, this device offers enhanced security and convenience in residential, commercial, and institutional settings.

General
BrandHikvision
ModelDS-KH9310-WTE1
Productintercom system
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-KH9310-WTE1 below.

How can I download the manual and related software for the Hikvision DS-KH9310-WTE1 intercom system?

To download the manual and related software for the Hikvision DS-KH9310-WTE1 intercom system, you can follow these steps: 1. Go to the official Hikvision website. You can access it by typing "http://www.hikvision.com" in your web browser. 2. Look for the "Support" or "Downloads" section on the website. This section usually contains resources and software for Hikvision products. 3. Navigate to the section specifically for the DS-KH9310-WTE1 intercom system. You may find it under the "Video Intercom" or "Intercom Systems" category. 4. In this section, you should find the manual and related software for the DS-KH9310-WTE1 intercom system. 5. Click on the download links provided to download the manual and software files to your computer. 6. Once the files are downloaded, you can access the manual to learn more about the usage and features of the DS-KH9310-WTE1 intercom system. 7. Install the related software on your computer according to the provided instructions, if applicable. By following these steps, you will be able to download the manual and related software for the Hikvision DS-KH9310-WTE1 intercom system from the official Hikvision website.

What are the specifications and features of the Hikvision DS-KH9310-WTE1 intercom system?

The Hikvision DS-KH9310-WTE1 intercom system offers the following specifications and features: 1. Compliance: The product is marked with the "CE" symbol, indicating compliance with applicable European standards such as EMC Directive 2014/30/EU, RE Directive 2014/53/EU, RoHS Directive 2011/65/EU, WEEE Directive 2012/19/EU, and battery directive 2006/66/EC. 2. Language Selection: You can change the system language by tapping on "Settings" and selecting "Basic Settings" and then "Select Language." 3. Brightness Adjustment: The intercom system allows you to adjust the brightness by accessing the "Settings" menu, selecting "Basic Settings," and adjusting the brightness settings. 4. Device Information: You can view important device information such as version, model, serial number, and library versions by tapping on "Settings," selecting "About," and then "Device Information." 5. Open Source Disclaimer: The intercom system provides an option to view the open-source disclaimer by accessing the "Settings" menu, selecting "About," and then "Open Source Disclaimer." 6. Do Not Disturb: You can enable the "Do Not Disturb" mode by tapping on "Settings," selecting "Call Settings," and then "Do Not Disturb." These specifications and features are specific to the Hikvision DS-KH9310-WTE1 intercom system.

How do I configure the Hikvision DS-KH9310-WTE1 intercom system for video intercom functionality?

To configure the video intercom functionality of the Hikvision DS-KH9310-WTE1 intercom system, you can follow these steps: 1. Click on the "Maintenance and Management" option. 2. Select "System Configuration" and then "Acs and Video Intercom" to access the system configuration page. 3. Enter the required information for video intercom parameters. 4. To set the ringtone for the indoor station, click on "Ringtone" and select an audio file from your local path. You can also test the audio file if desired. 5. Input the maximum duration of the ringtone in seconds, ranging from 15 to 60 seconds, in the "Max. Ring Duration" field. 6. Input the maximum duration of speaking with the indoor station in seconds, ranging from 120 to 600 seconds, in the "Max. Speaking Duration with Indoor Station" field. 7. Input the maximum duration of speaking with the door station in seconds, ranging from 90 to 120 seconds, in the "Max. Speaking Duration with Door Station" field. 8. Click "Save" to save the settings. 9. For remote configuration, select a device from the device list and click on the corresponding option to enter the remote configuration page. 10. On the remote configuration page, you can access various device information and settings related to the video intercom functionality. By following these steps, you will be able to configure the video intercom functionality of the Hikvision DS-KH9310-WTE1 intercom system.

How do I troubleshoot issues with the Hikvision DS-KH9310-WTE1 intercom system's network connection?

To troubleshoot issues with the network connection of the Hikvision DS-KH9310-WTE1 intercom system, you can follow these steps: 1. Check the network settings: Access the "Network Settings" menu and ensure that the connection type is correctly set as either "Wired" or "Wireless" based on your network setup. 2. Wired Connection: If using a wired connection, verify that the network parameters are correctly configured. You can choose to set the parameters automatically using DHCP or manually by editing the local IP, subnet mask, and gateway parameters. 3. Wireless Connection: If using a wireless connection, select the appropriate Wi-Fi network from the drop-down list to establish the connection. 4. Debugging Settings: In the "Debugging Settings" menu, enable the Android Debug Bridge (ADB) if necessary. This can help diagnose network-related issues. 5. Local Network Configuration: Access the "Local Network Configuration" page to enter the local IP address, subnet mask, gateway address, and port number. Ensure that these parameters are correctly set and click "Save" to apply the settings. By following these steps, you can troubleshoot network connection issues with the Hikvision DS-KH9310-WTE1 intercom system.

Where can I find the configuration guide for the Hikvision DS-KH9310-WTE1 intercom system's video intercom functionality?

To find the configuration guide for the Hikvision DS-KH9310-WTE1 intercom system's video intercom functionality, you can follow these steps: 1. Access the "Maintenance and Management" section of the intercom system's settings. 2. Navigate to the "System Configuration" menu. 3. Select "Acs and Video Intercom" to enter the system configuration page. 4. Look for the "Video Intercom 9 Series Indoor Station Configuration Guide" in the available documents. 5. Click on the guide to access the detailed instructions for configuring the video intercom functionality. 6. Within the guide, you will find information on system configuration, including steps for setting up parameters such as ringtone, maximum ring duration, maximum speaking duration with the indoor station, and maximum speaking duration with the door station. 7. Additionally, the guide may provide instructions for remote configuration and accessing device information. By following these steps, you will be able to locate the configuration guide for the Hikvision DS-KH9310-WTE1 intercom system's video intercom functionality within the system's settings.

Is the manual of the Hikvision DS-KH9310-WTE1 available in English?

Yes, the manual of the Hikvision DS-KH9310-WTE1 is available in English .

Is your question not listed? Ask your question here

No results