Hikvision DS-KH8520-WTE1 manual

Hikvision DS-KH8520-WTE1
7.7 · 2
PDF manual
 · 82 pages
English
manualHikvision DS-KH8520-WTE1
1

DS-KH8520-WTE1

Network Indoor Staon UD20187B
3
4
Screen
1
Screen Microphone
2
Debugging Port
3
TF Card Slot
4
Alarm Terminal
5
Power Terminal
6
Network Interface
7
Loudspeaker
8
Note:
The appearance of the device varies according to different models. Refers to the actual device for detailed
informaon.
The debugging port is used for debugging only.
Terminal and Wiring
2
There are 20 pins in the terminal on the rear panel of the indoor staon: 2 RS-485 pins, 5
reserved pins, 4 relay output pins, 8 alarm input pins, and 1 GND pin.
Installaon
3
It supports wall mounng. There are two installaon modes.
ENGLISHDiagram References
Appearance
1
Installaon Accessory Descripon
The wall mounng plate and juncon box are required to install the indoor staon onto
the wall.
The dimension of juncon box should be 75 mm (width) 75 mm (length) 50 mm × ×
(depth). The dimension of wall mounng plate is shown.
Wall Mounng with juncon Box
Make sure the device in the package is in good condion and all the assembly parts
are included.
The power supply the indoor staon supports is 12 VDC. Please make sure your
power supply matches your indoor staon.
Make sure all related equipments are power-off during the installaon.
Check the product specificaon for the installaon environment.
Before You Start
1. Chisel a hole in the wall. The size of the hole should be 76 mm (width) × 76 mm
(length) × 50 mm (depth).
2. Insert the juncon box to the hole chiseled on the wall.
3. Fix the wall mounng plate to the juncon box with 2 screws.
4. Hook the indoor staon to the wall mounng plate ghtly by inserng the plate
hooks into the slots on the rear panel of the indoor staon, during which the lock catch
will be locked automacally.

11

3
Geng Started
4
You are required to acvate the device first by sengs a strong password before you
can use the device.
1. Power on the device. It will enter the acvaon page automacally.
2. Create a password and confirm it.
3. Tap OK to acvate the indoor staon.
Acvate Indoor Staon
1
Quick Configuraon
2
Refers to Video Intercom Network Indoor Staon Configuraon Guide (Scan the QR code) for details.
Refers to Video Intercom Network Indoor Staon Operaon Guide (Scan the QR code) for details.
5
6
7
8
1
2
Wall Mounng without juncon Box
1. Insert 2 expansion tubes into the wall.
2. Fix the wall mounng plate to the juncon box with 2 screws.
3. Hook the indoor staon to the wall mounng plate ghtly by inserng the plate
hooks into the slots on the rear panel of the indoor staon, during which the lock catch
will be locked automacally.
3
Rear Panel (without Interface)Lock Catch Lock CatchLock CatchLock Catch
Hook
Hook
Hook
Hook
ScrewWall Mounng Plate WallRear Panel (without Interface)Lock Catch Lock CatchLock CatchLock Catch
Hook
Hook
Hook
Hook
ScrewWall Mounng Plate Juncon Box WallScan the QR code to get the Operaon Guide for detailed informaon.Scan the QR code to get the Configuraon Guide for detailed informaon.
122
Unit:mm
100
64.85RS-485Reserved
2
Relay OutputAlarm Input DeviceRS-485+RS-485-
RES
RES
RES
RES
RES
NO2
NO1
COM1
COM2
AIN7
AIN6
AIN5
AIN4
AIN3
AIN2
AIN1
GND
AIN8
Red
Red
Blue
GreenYellowYellowWhiteBlack
Red
BlackBlackBlackBlackWhiteWhiteWhiteWhiteWhiteWhiteWhite
1. Choose Language and tap Next.
2. Set network parameters and tap Next.
- Edit Local IP, Subnet Mask and Gateway parameters.
- Enable DHCP, the device will get network parameters automacally.
3. Configure the indoor staon parameters.
- .Select Indoor Staon and tap Next to link main door staon.
a. Edit Floor and Room No.
b. Create and confirm SIP register password.
Note: If you want to add the indoor staon to the door staon, the SIP password of the indoor staon
should be the same as the registraon password of the door staon.
c. Tap Advanced Sengs to edit Community No, Building No. and Unit No.
d. Oponal: Enable Indoor Staon Sengs and select the indoor staon to link.
- . Select Indoor Extension and tap Next to link indoor staon.
a. Edit No., Room Name.
b. Create and confirm SIP register password.
4. Linked related devices and tap Next. If the device and the indoor staon are in the
same LAN, the device will be displayed in the list. Tap the device or enter the serial No.
to link.
a. Tap the sengs icon to pop up the Network Sengs page.
b. Edit the network parameters of the door staon manually or enable DHCP to get
the network parameters automacally.
e. Tap OK to save the sengs.
5. Tap Finish to save the sengs.

View the manual for the Hikvision DS-KH8520-WTE1 here, for free. This manual comes under the category intercom systems and has been rated by 2 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KH8520-WTE1 or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Deb MiddletonApril 27, 2023

My intercom keeps failing I have rebooted but to no avail

The Hikvision DS-KH8520-WTE1 is an intercom system designed for professional and commercial use. It offers advanced features and functionality to meet the needs of various security and communication requirements. The DS-KH8520-WTE1 features a sleek and modern design that blends well in any environment. It is equipped with a high-resolution 10-inch touch screen display, providing clear and sharp images. The touch screen interface enables easy and intuitive operation, enhancing user experience. With its advanced audio processing technology, the DS-KH8520-WTE1 ensures excellent voice quality during intercom conversations. It has noise cancellation and echo suppression capabilities, allowing for clear communication even in noisy environments. This intercom system supports both audio and video communication. It features a built-in camera with a wide-angle lens, enabling video calls and video monitoring. The camera provides high-definition video with detailed images, enhancing security and surveillance. The DS-KH8520-WTE1 supports multiple communication protocols, allowing for seamless integration with other security devices and systems. It supports SIP protocol, enabling integration with IP phone systems. It also supports standard protocols for seamless connectivity to the Hikvision video surveillance system. This intercom system is equipped with advanced security features to protect against unauthorized access. It supports multiple authentication methods, including fingerprint recognition and IC card authentication. It also has a tamper-proof design and supports encrypted communication for data security. Overall, the Hikvision DS-KH8520-WTE1 is a professional-grade intercom system that offers advanced features and functionality. Its high-resolution touch screen display, excellent audio quality, advanced security features, and seamless integration capabilities make it a reliable choice for various applications.

General
BrandHikvision
ModelDS-KH8520-WTE1
Productintercom system
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-KH8520-WTE1 below.

How do I set up the Hikvision DS-KH8520-WTE1 intercom system?

To set up the intercom system, first, connect the power adapter to the device and plug it into a power outlet. Then, connect the system to your network using an Ethernet cable. Finally, follow the on-screen instructions to complete the setup process and configure the system according to your preferences.

How can I add new devices to the intercom system?

To add new devices, first access the intercom system's settings menu. Then, navigate to the device management section and select the option to add a new device. Follow the prompts on the screen to connect and register the new device with the intercom system.

Can I change the display settings on the intercom system?

Yes, you can adjust the display settings. To do so, go to the settings menu and find the display settings section. From there, you can customize various aspects such as brightness, contrast, screen timeout, and language preferences to enhance your user experience.

How can I enable motion detection on the intercom system?

Motion detection can be enabled within the intercom system's settings. Locate the motion detection settings section and configure the desired sensitivity level and detection areas. Once enabled, the system will notify you when motion is detected in the designated areas.

Is it possible to integrate the intercom system with other security devices?

Yes, the Hikvision DS-KH8520-WTE1 intercom system supports integration with various security devices. This can include connecting it to CCTV cameras, door sensors, or even alarm systems. Refer to the intercom system's settings menu for options related to integration and follow the instructions to establish the desired connections.

Is the manual of the Hikvision DS-KH8520-WTE1 available in English?

Yes, the manual of the Hikvision DS-KH8520-WTE1 is available in English .

Is your question not listed? Ask your question here

No results