When the video intercom device is under armed status, it will capture the picture
automatically after unlocking the door. The captured picture can be uploaded and stored
in the storage server.
When starting the live view of door station via iVMS-4200, you can capture the live view
picture. The captured picture can be uploaded and stored in the storage server.
This function is only available to door stations.
You are required to add storage server to the iVMS-4200, and format the HDDs first
before uploading and storing captured pictures.
9.4.1Adding Storage Server
Before you start:
The storage server application software needs to be installed and it is packed in the
iVMS-4200 software package. When installing the iVMS-4200, check the checkbox of
Storage Server to enable the installation of storage server.
1.Click the icon on the desktop to run the storage server.
2.Open the Device Management page and click the Server tab.
3.Click Add New Device Type, select Storage Server and click OK.
Figure 9-8Adding Storage Server Type
View the manual for the Hikvision DS-KH6310 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KH6310 or do you need help? Ask your question here
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0