2)Enter the server address, NTP port, and synchronization interval.
DST
1)Check the checkbox of Enable DST to enable DST.
2)Enter the start time and end time of DST, and set the DST bias.
3.Click the Save button to save and realize the time settings.
The default port No. is 123.
System Maintenance
Purpose:
You can operate the system management and remote upgrading on the system
maintenance interface.
Steps:
1.Click the System Maintenance button to enter the system maintenance interface.
Figure 8-15System Maintenance
2.Click Reboot and the system reboot dialog box pops up. Click Yes to reboot the
system.
3.Click Restore Default Settings to restore the default parameters.
4.Click Restore All to restore all parameters of device and reset the device to inactive
status.
5.Click Import Configuration File and the import file window pops up. Select the path
of remote configuration files. Click Open to import the remote configuration file. The
configuration file is imported and the device will reboot automatically.
View the manual for the Hikvision DS-KH6310 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KH6310 or do you need help? Ask your question here
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0