The default IP address of the indoor station is 192.0.0.64.
After editing the network parameters of device, you should add the devices to the
device list again.
Enable DHCP, and the software can obtain network parameters for the device
automatically.
8.3Adding Device
Before you start:
Make sure the device to be added has been activated.
Purpose:
For batch configuration tool software, you should add device to the software so as to
configure the device remotely.
The software provides 3 ways for adding the devices. You can add the active online
devices within your subnet, add devices by IP address, and add devices by IP segment.
8.3.1Adding Online Device
Before you start:
Make sure the device to be added is in the same subnet with your computer. Otherwise,
please edit network parameters first.
Steps:
1.Select anactive online device or hold the Ctrl or Shift key to select multiple devices in
the online devices list.
View the manual for the Hikvision DS-KH6310 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KH6310 or do you need help? Ask your question here
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0