Enable DHCP function to obtain an IP address automatically.
Enable Same LAN function if indoor stations and indoor extensions are in the same
local area network with other video intercom devices in a community, or the indoor
extensions will not work normally.
Setting the SIP Server
Purpose:
To realize the connection between the indoor station and the management center
(master station), the indoor station should connect to a SIP server in advance.
Steps:
1.Get to the device management interface: Settings -> Configuration -> Device.
2.Press the SIP Sever tab, and enter the IP address of the SIP server.
3.Press the tab to save the SIP server added.
The master station can work as a SIP server.
Indoor extension cannot connect to the SIP server.
Adding Devices
Purpose:
The indoor station never works alone. You can connect the main door station, IP camera,
SIP server, management center, master station, DVR/DVS/NVR, and so on. Once
connected, those devices can work together as a whole video intercom system.
The DS-KH6210-L indoor station does not support adding IP camera, DVR/DVS/NVR,
or doorphone.
Indoor Extension only supports adding indoor station.
Setting Center/Master Station (Optional)
Steps:
1.Get to the device interface: Settings -> Configuration -> Device.
2.Press the Center or Master Station tab to pop up the device information dialogue
box.
View the manual for the Hikvision DS-KH6310 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KH6310 or do you need help? Ask your question here
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0