tab to enter corresponding arming mode settings interface.
3.Switch to to enable the arming in the selected zoon.
Zones in each arming mode can be configured manually. See detailed information in
7.3.4 Zone Settings.
For 24H alarm zone and smoke detector zone, even if it is disabled under current
arming mode, the indoor station will still alarm when it is triggered.
Arming mode settings should be configured with the settings of arming status on the
the user interface of the device.
The DS-KH6210-L and DS-KH6310-WL indoor stations only support 2 zones.
7.3.6System Maintenance
Purpose:
You can format TF card, clear the screen, view the version information of the indoor
station and reboot the system on the system maintenance interface.
Steps:
1.Get to the system maintenance interface: Settings -> Maintenance.
2.Press the Format tab to format the TF card.
3.Switch to to enable the clear screen mode.
View the manual for the Hikvision DS-KH6310 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KH6310 or do you need help? Ask your question here
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0