3.Set the zone type, alarm type, status of arming status, entering delay, and exiting
delay.
4.Press the tab to save the settings.
6 zone types are selectable: Panic Button, Door Magnetic, Smoke Detector, Active
Infrared, Passive Infrared, and Gas Detector.
3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
Set the alarm type as instant alarm, and the zone will alarm once it’s triggered.
Set the alarm type as delay alarm, and you should set the entering delay
duration and exiting delay duration.
Both the entering delay duration and the exiting delay duration are from 30s to 60s.
For Gas Detector and Smoke Detector, the alarm type is set as default 24h alarm.
The DS-KH6210-L and DS-KH6310-WL indoor stations only support 2 zones.
7.3.5Arming Mode Settings
Purpose:
4 arming modes can be configured: outdoor mode, indoor mode, sleeping mode and
custom mode.
Steps:
1.Get to the arming mode settings interface: Settings -> Arming Mode
View the manual for the Hikvision DS-KH6310 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KH6310 or do you need help? Ask your question here
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0