Safety Instrucon W arning
●
All the electronic oper aon should be strictly compliance with the electrical saf ety
regulaons, re pr evenon regulaons and other rela ted regulaons in your local
region.
●
Please use the power adapt er , which is pr ovided by normal compan y . The power
consumpon cannot be less than the requir ed value.
●
Do not connect sever al devices to one power adap ter as adapter overload ma y
cause over -heat or re haz ard.
●
Please mak e sure that the power has been disc onnected befor e you wire, ins tall or
dismantle the device.
●
When the product is ins talled on wall or ceiling, the device shall be
rmly xed.
●
If smok e, odors or noise rise from the device, turn
o the power at once and
unplug the power cable, and then please c ontact the service center .
●
If the product does not work pr operly , please c ontact your dealer or the near est
service center . Never aempt to disassemble the de vice yourself . (W e shall not
assume any r esponsibility for problems c aused by unauthorized repair or
maintenance.)
Cauon
●
Do not drop the device or subject it t o physical shock, and do not e xpose it to high
electromagnesm r adiaon. Avoid the equipment inst allaon on vibraons
surface or places subject t o shock (ignorance can cause equipmen t damage).
●
Do not place the device in extr emely hot (ref er to the specicaon of the device
for the det ailed operang temper ature), cold, dus ty or damp locaons, and do not
expose it to high electr omagnec radiaon.
●
The device cover f or indoor use shall be k ept from r ain and moisture.
●
Exposing the equipment to dir ect sun light, low venlaon or heat source such as
heater or r adiator is f orbidden (ignorance can cause
re danger).
●
Do not aim the device at the sun or e xtra bright places. A blooming or smear ma y
occur otherwise (which is not a malfuncon however), and a ecng the
endurance of sensor a t the same me.
Video Inter com Face
Recognion Door St aon User Manual
iv
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0