Hikvision DS-KD9403-E6 manual

Hikvision DS-KD9403-E6
8.1 · 1
PDF manual
 · 102 pages
English
manualHikvision DS-KD9403-E6

DS-KD9403-E6

Face Recognition Door StationDiagram References
E N G L I S H
Appearance

Installation

Before you begin:AccessoryMountingGang BoxMounting Plate
1
3
3.1
3.2

Terminal

2
Surface Mounting1. Paste the mounting template on the wall according to the installation requirements. Drill holesacording to the template. Insert the expansion bolts into the screw holes.
2. Fix the mounting plate to the wall with 4 supplied screws.
3. Fix the device to the mounting plate and fix the device with the set screws.
Note:
Do not touch the SD card slot and other devices during the process of plugging in and unplugging the
power interface.
Apply Silicone sealant among the joints between the device and the wall (except the lower side) to
keep the raindrop from entering.Flush Mounting
1. Cave an installation hole on the wall. Pull the cable out from the wall.
Note:
The suggested dimension of the installation hole is 237.5 mm (W) × 128.9 mm (H) × 41.3 mm (D).
The suggested length of the cables left outside is 250 mm.
2. Install the gang box into the wall.
a. Insert the gang box into the installation hole. Mark the gang box screw holes’ position with a
marker, and take out the gang box.
b. Drill 4 screw holes according to the marks on the wall, and insert the expansion sleeves into the
screw holes.c. Fix the gang box with 4 expansion bolts.3. Insert the door station into the gang box and x it with set screw.
Note:
Do not touch the SD card slot and other devices during the process of plugging in and unplugging the
power interface.
Apply Silicone sealant among the joints between the device and the wall (except the lower side) to keep
the raindrop from entering.
Door station can be wired to alarm input device,door lock, door contact and so on.
1. Accessories that you need to prepare for installation: Mounting plate and gang box.
2. Make sure the power supply meet the power requirements of the door station (12 VDC, 2 A).
3. Make sure all the related equipment is power-o during the installation.
4. Wire the cables during installation.
The dimension of the mounting plate is 233 mm (W) × 112.4 mm (H) × 21 mm (D).
The dimension of the mounting plate is 236.9 mm (W) × 128.4 mm (H) × 40.8 mm (D).
The installation hole should be bigger than the actual size. The suggested dimension of theinstallation hole is 237.5 mm (W) × 128.9 mm (H) × 41.3 mm (D).
Note:The door station can be congured via iVMS-4200 Client Software remotely.
Note: The appearance of the device vary according to dierent model. Refers to the actual device.

Conguration4

Refer to Video Intercom Face Recognition Door Station User Manual (scan the QR code) for details.
UD23390B
1 2
3.1
3.2
Activate Device
1. Power on the device to enter the activation page automatically.
2. Create a password and conrm it.
3. Tap Next to activate the door station.
Note: Enter an 8 to 16 characters admin password.
You are required to activate the device rst by setting a strong password for it before you can use the device.
1
Edit Network Parameters
1. Hold the main page and enter the admin password to enter the settings page.
2. Tap Network Settings and edit parameters including IP address, subnet mask and gateway.
3. Exit the page to save the settings.
2
No. Settings
3
Add Resident
4
Call Resident
5
1. Hold the main page and enter the admin password to enter the settings page.
2. Tap Local Settings and edit device No. including Phase No., Building No., Unit No., Floor No.,
No. and Community No.
3. Exit the page to save the settings.
Note:
The No. of main door station is 0. The No. of sub door station ranges from 1 to 8.
1 unit should add at least 1 main door station. Up to 8 sub door station can be added to the
main door station.
1. Hold the main page and enter the admin password to enter the settings page.
2. Tap User Management and add users.
3. Set room No. and add card, face and fingerprint. Select user permission to add.
4. Exit the page to save the settings.
Note: Refers to the User Manual for details.
The door station can work as main/sub door station, and outer door station, which correspond
to dierent calling resident modes respectively.
On the calling page, enter the room No. and tap call button to call resident.
Unlock by Entering PasswordUnlock by Face
The device support unlock the door by presenting card, entering password, and ngerprint. Here takes unlock
by entering password and unlock by presenting card for example.
Note: You should create the password and add the card to the device rst.
Common Password
Tap call icon, enter # + password and tap ulock icon to unlock the door.
Public Password
Note: Create the public password via iVMS-4200 Client Software remotely rst.
Tap call icon, enter # + public password + # to unlock the door.
Face forward at the camera to unlock.
Unlock Door
6
Wiring Terminal
Network Interface
Analog & RS-485 Interface
1 2 3
4
5
87
9
10 11 12
IR Supplement Light
Microphone
6 Camera
Ambient Light Sensor
TAMPER
Loudspeaker
Debugging Port
microUSB Interface TF Card Slot
233
180
83.5
11
80
4
2
60
112.4
21
Unit:mmSet ScrewDoor StationScrewsGang Box
Wall
Yellow/RedYellow/WhiteYellow/BlueYellow/GreenBlue/BlackBrown
Grey
OrangePurpleWhite/BlueWhite/GreenWhite/RedGrey/BlueGrey/GreenGrey/Red
Lock Control
Alarm Input Device
Alarm Output Device
485B-
GND
485A-485B+485A+YellowYellow/BlackBlack GND
GND
AIN1
AIN2
AIN3
AIN4
AO1+
AO1-
AO2+
AO2-
NC1
COM1
NO1
NC2
COM2
NO2
Blue
GreenWhite
Red
DC 12V IN
Reserved
Card Reader
Power Input
236.9
40.8
128.4
60
Unit:mm
Set Screw Door Station Screws Mounting Plate Mounting Template Wall
Call from Main/Sub Door StationCall from Outer Door Station
Enter Building No. + # + Unit No. + # + Room No. and tap call button to call resident.
2 3
4
5 6 7
8
9
10 11
12
1

View the manual for the Hikvision DS-KD9403-E6 here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KD9403-E6 or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Hikvision DS-KD9403-E6 is an intercom system that offers reliable and efficient communication between users in various settings. Designed for professional use, this intercom system provides clear and crisp audio quality for effective communication. With its advanced technology and innovative features, the Hikvision DS-KD9403-E6 enables users to easily connect and communicate with one another. Its user-friendly interface allows for simple navigation and operation, making it suitable for a wide range of applications. Constructed with high-quality materials, the Hikvision DS-KD9403-E6 is built to withstand the test of time, ensuring long-lasting performance and durability. Its sturdy design guarantees reliable communication even in challenging environments. This intercom system also offers flexibility and scalability, allowing for easy integration with other security systems or devices. With its compatibility and expandability, the Hikvision DS-KD9403-E6 can be customized to meet the specific requirements of different locations and setups. Moreover, the Hikvision DS-KD9403-E6 features advanced security measures to protect against unauthorized access and ensure the privacy of conversations. With its reliable encryption and secure communication protocols, users can have peace of mind knowing that their conversations are protected. Overall, the Hikvision DS-KD9403-E6 is a dependable intercom system that provides efficient and secure communication in various professional settings. Its advanced features, durability, and compatibility make it a reliable choice for those seeking a high-quality intercom system.

General
BrandHikvision
ModelDS-KD9403-E6
Productintercom system
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-KD9403-E6 below.

How can I enable NTP and set the server address if the time on the intercom system is not syncing correctly?

To enable NTP and set the server address for time syncing on the Hikvision DS-KD9403-E6 intercom system, follow these steps: 1. Navigate to Network > Basic Settings > TCP/IP. 2. Choose the Network Card. 3. Configure the network parameters: - If using DHCP, the device will obtain parameters automatically. - Manually set the IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway. 4. Configure the DNS server. 5. Edit the Alarm Center IP and Alarm Host Port. 6. Click Save to apply the settings. By following these steps, you can enable NTP and set the server address to ensure accurate time syncing on your Hikvision DS-KD9403-E6 intercom system.

What steps should I follow if I need to reboot the device to resolve a technical issue with the intercom system?

To reboot the Hikvision DS-KD9403-E6 intercom system to resolve a technical issue, follow these steps: 1. Tap on "Maintenance" and then select "Upgrade & Maintenance" to access the settings page. 2. Click on "Reboot" to initiate the reboot process. 3. Wait for the device to restart and complete the rebooting process. By following these steps, you can effectively reboot the device to address any technical issues you may be experiencing.

In case I accidentally restore all parameters to default settings, how can I recover the previous settings on the Hikvision DS-KD9403-E6 intercom system?

To recover the previous settings on the Hikvision DS-KD9403-E6 intercom system after accidentally restoring all parameters to default settings, follow these steps: 1. Click on "Restore to Factory Settings" to reset all parameters to default settings. 2. Ensure not to power off the device during the upgrading process, which may last 1 to 10 minutes. 3. After upgrading, the device will reboot automatically. 4. You can also export parameters before restoring, set security services, and view device information for reference. These steps will help you recover the previous settings on your Hikvision DS-KD9403-E6 intercom system.

Is the manual of the Hikvision DS-KD9403-E6 available in English?

Yes, the manual of the Hikvision DS-KD9403-E6 is available in English .

Is your question not listed? Ask your question here

No results