Hikvision DS-KD-KK/S manual

Hikvision DS-KD-KK/S
7.5 · 1
PDF manual
 · 100 pages
English
manualHikvision DS-KD-KK/S

DS-KD-KK DS-KD-M(E)

Video Intercom Module Door Staon UD21094B-AENGLISHDiagram References
1
Call Buon
2
Card Reading Area
3
4
5
Module-connecng Interface (Output)
6
Debugging Port
Note: The module-connecng interface is used to connect other funcon module, such as nametag module,
keypad module, card reader module, etc. All these modules are known as sub module.
Appearance
1
1
Nametag
Terminal
2
A1
A2
A3
A4
485-: Module-connecng Interface (Input)
B1
B2
B3
B4
Installaon
3
Note: Video intercom module door staon support one-module installaon, two-module installaon, three-
module installaon and more-than-three-module installaon. Here takes three-module installaon as an
example.
Tools that you need to prepare for installaon: Drill(6), cross screw driver (PH1*150
mm), and gradienter.
Make sure all the related equipment is power-off during the installaon.
Make sure you have configured the sub module address before installaon. Valid sub
module address range is 1 to 8. The No. should be unique for sub modules that
connected to the same main unit. The sub module address and corresponding switch
status is shown as the figure.
Before You StartThree-Module Flush Mounng
1. Cave the installaon hole, and pull the cable out.
Note: The suggested dimension of the installaon hole is 321.8(W) × 108(H) × 45.5(D) mm. The suggested
length of the cables le outside is 270 mm.
2. Select a cable entry and remove the plasc sheet. Route the cables through the gang
box hole. Insert the gang box into the installaon hole. Mark the gang box screw holes’
posion with a marker, and take out the gang box.
3. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into
the screw holes. Fix the gang box with 4 expansion bolts.
4. Fill the gap between the gang box and wall with concrete or Silicone sealant. Remove
the mounng ears with tool aer concrete is dry.
5. Connect cables and insert the modules.
a.Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of the main
unit, then insert the main unit into the upper grid.
b.Connect the other end of Cable 2 to the input interface of Sub Module 1. Connect
one end of Sub Module 1 and insert it into the middle grid.
c.Connect the other end of Cable 3 to the input interface of Sub Module 2. Insert it
into the boom grid.
6. Fix the cover and the main unit with 2 socket head cap screws by using a hexagon
wrench.
Surface Mounng with Protecve Shield
1. Paste the installaon scker 1 onto the wall. Make sure the scker is placed
horizontally via measuring with the gradienter. Drill 4 holes according to the screw holes
on the scker.
Note: The suggested size of hole is 6(diameter) × 25(depth) mm. The suggested length of the cables le
outside is 270 mm.
2. Remove the scker and insert the expansion sleeves into the screw holes. Fix the
mounng frame
onto the wall with 4 expansion bolts.
3. Thread the module-connecng line across the thread holes of the frame. Pass the
main unit
connecng line across the thread hole to the top grid and connect the cables.
a.Connect the lines and module-connecng line 1 to the corresponding interfaces of
the main unit,
then place the main unit into the upper grid.
b.Connect the other end of the module-connecng line 1 to the input interface of the
sub modules via module-connecng line 2.
c.Organize the cables with cable e in the package.
4. Insert the modules into the frame aer wiring. The main unit must be placed in the
top grid.
5. Use the hexagon wrench in the package to fix the cover onto the frame.
Gang Box

1 2 3 4 5 6

13

Expansion BoltMounng EarMain UnitSub Module 1Sub Module 2HexagonalScrew
1
2
2
2
1
3
3
3

13

1
2
3
4
5 6
2
Module-connecng Interface (Input)
A1 A4 B4B1
GND
12V OUT
485+
485-
GND
12V IN
485+
485-
RS485 IN RS485 OUT
485+: Module-connecng Interface (Input)
12V IN: Module-connecng Interface (Input)
GND: Module-connecng Interface (Input)
485-: Module-connecng Interface (Output)
485+: Module-connecng Interface (Output)
12V IN: Module-connecng Interface (Output)
GND: Module-connecng Interface (Output)
Nametag Module Card Reader Module
1

2 3 4 5

Module-Connecng Line1Module-Connecng Line2Thread HoleCables Connectedto Main ModuleMain UnitSub ModuleMounng FrameHexagonalScrewCoverHexagon Wrench

View the manual for the Hikvision DS-KD-KK/S here, for free. This manual comes under the category intercom systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-KD-KK/S or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Hikvision DS-KD-KK/S is a nametag unit intercom system designed for surface mounting. It is compatible with Hikvision brand products and has an International Protection (IP) code of IP65, making it resistant to dust and water. With dimensions of 98.5mm in width, 34.2mm in depth, and 100mm in height, the DS-KD-KK/S is a compact and lightweight device, weighing only 265g. It has an IK code of IK07, indicating a moderate level of impact resistance. The package weight of the DS-KD-KK/S is 529g and it comes with one piece per pack. This intercom system also holds sustainability certificates for RoHS, WEEE, and REACH compliance. The product belongs to the KD8 Series Pro Modular Door Station line, offering a professional and modular solution for building security and communication needs. The nametag unit is designed to seamlessly integrate with other components of the Hikvision security system. Overall, the Hikvision DS-KD-KK/S intercom system provides a reliable and durable solution for accessing and communicating with visitors at the door.

General
BrandHikvision
ModelDS-KD-KK/S | DS-KD-KK/S
Productintercom system
EAN6941264072140, 5420016874498
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Features
Brand compatibilityHikvision
International Protection (IP) codeIP65
Product colorBlack, Transparent
Mounting typeSurface
IK codeIK07
Product typeNametag unit
Packaging data
Quantity per pack1 pc(s)
Package weight529 g
Weight & dimensions
Width98.5 mm
Depth34.2 mm
Height100 mm
Weight265 g
Operational conditions
Operating temperature (T-T)-40 - 55 °C
Technical details
Sustainability certificatesRoHS, WEEE, REACH
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-KD-KK/S below.

What is the weight of the Hikvision DS-KD-KK/S?

The Hikvision DS-KD-KK/S has a weight of 265 g.

What is the height of the Hikvision DS-KD-KK/S?

The Hikvision DS-KD-KK/S has a height of 100 mm.

What is the width of the Hikvision DS-KD-KK/S?

The Hikvision DS-KD-KK/S has a width of 98.5 mm.

What is the depth of the Hikvision DS-KD-KK/S?

The Hikvision DS-KD-KK/S has a depth of 34.2 mm.

Is the Hikvision DS-KD-KK/S compatible with other Hikvision products?

Yes, the Hikvision DS-KD-KK/S is compatible with other Hikvision products, making it easy to integrate into an existing Hikvision security system.

What is the International Protection (IP) code of the Hikvision DS-KD-KK/S?

The Hikvision DS-KD-KK/S has an IP65 rating, meaning it is dust tight and protected against water jets, making it suitable for outdoor use.

How many units come in each pack of the Hikvision DS-KD-KK/S?

Each pack of the Hikvision DS-KD-KK/S contains 1 unit, making it convenient for individual installations.

What is the mounting type of the Hikvision DS-KD-KK/S?

The Hikvision DS-KD-KK/S has a surface mounting type, making it easy to install on walls or surfaces for quick deployment.

What is the IK code of the Hikvision DS-KD-KK/S?

The Hikvision DS-KD-KK/S has an IK07 rating, indicating it provides moderate protection against impact, making it suitable for most indoor and outdoor environments.

How can I export parameters for the Hikvision DS-KD-KK/S intercom system?

To export parameters for the Hikvision DS-KD-KK/S intercom system, follow these steps: 1. Select Device Parameters and click Export to open the dialog box. 2. Set and confirm the encryption password. 3. Click OK to export the parameters. For importing configuration files: 1. Click the browse icon to select the configuration file. 2. Click Import and enter the encryption password to import. To upgrade the system: Click the browse icon to select the upgrade file. Note that the upgrading process may take 1 to 10 minutes. Do not power off during the upgrade; the device will reboot automatically after upgrading. For security settings: Navigate to Security > Security Service to enable SSH as needed. Save the settings. For user management: Go to User Management to edit user permissions. It is recommended to create a strong password with at least 8 characters, including uppercase letters, lowercase letters, numbers, and special characters. Change your password regularly for increased security.

What precautions should I take during the upgrade process of the intercom system?

During the upgrade process of the Hikvision DS-KD-KK/S intercom system, follow these precautions: 1. Export parameters by selecting Device Parameters and clicking Export to set and confirm the encryption password. 2. Import Configuration File by selecting the configuration file and entering the encryption password. 3. Choose the upgrade file carefully and avoid powering off the device during the 1 to 10-minute upgrading process. 4. Enable SSH in Security Service settings if needed and save the settings. 5. Manage User Management by editing user permissions and creating a strong password with at least 8 characters, including uppercase letters, lowercase letters, numbers, and special characters. 6. Regularly change your password for increased security. 7. Reboot the device or restore parameters to default settings if necessary.

Is the manual of the Hikvision DS-KD-KK/S available in English?

Yes, the manual of the Hikvision DS-KD-KK/S is available in English .

Is your question not listed? Ask your question here

No results